Yamaha AW4416 manual Recorder input patching, Monitor channels, Stereo, Bus, Direct OUT

Chapter1—Welcome to the world of the AW4416

Recorder input patching

This section assigns the signals that are input to tracks 1–16 of the recorder sec- tion. The following types of signal can be selected.

❍STEREO

The stereo bus output signal that has passed through the stereo output channel.

❍BUS 1–8

The output signal of buses 1–8.

❍DIRECT OUT 1–16

The direct output signal of input channels 1–16.

RECORDER INPUT 1~16

8

BUS 1~8

16

CH DIRECT OUT1~16

2

STEREO

INPUT PATCH

16

DITHER

RECORDER INPUT 1(...16)

Monitor channels 1–16

These are monaural channels that are assigned to the track 1–16 outputs of the recorder section. According to the input monitor settings or the state of the trans- port, they will input either the signals being input to tracks 1–16, or the playback signals of tracks 1–16.

As an exception, the stereo track will be patched to monitor channels 1/2 when the stereo track of that song is being played back, and the remainder of the moni- tor channels 3–16 will be muted.

The structure of these channels is the same as that of the input channels, with the exception that the direct output is fixed at a point immediately before the attenu- ator.

RECORDER MONI 1(...16)

	STEREOL	STEREOR	SOLOL	SOLOR	AUX 1	...	7(EFF1)AUX 8(EFF2)AUX
BUS1 BUS2 BUS3 BUS4 BUS5 BUS6 BUS7 BUS8						AUX 6

RECORDER

RECORDER 16 REPRO1-16

RECORDER	2
ST Trk L/R

16

RECORDER INPUT 1-16

(FL Display)	METER
METER
INPUT	INSERT
MONITOR
PATCH	ATT
INPUT	RECORDER
	DIRECT OUT

METER

ON LEVEL

4 BAND EQ			DY-	INPUT
			NAMICS	DELAY
	METER		METER
	(EQ)	(Gain Reduction)

Mono in X 16

PREFADER LISTEN/
AFTER PAN	SOLO
METER
PAN
PRE/POST ON	AUX

26 — Operation Guide