Yamaha AW4416 manual Etime, Fevent, Gchannel, Automix

Chapter14—Automix

2.Move the cursor to the SCENE/LIB button, and press the [ENTER] key.

The scene/library recall events recorded in the automix will be displayed in the list. The event enclosed by the dashed line in the center of the list is the event cur- rently selected for editing.

3.Move the cursor to the at the left of the list, and rotate the [DATA/ JOG] dial to scroll the list and select the event that you wish to edit.

4.Use the CURSOR []/[] keys to move the cursor to the data item within that event that you wish to edit.

ETIME

The timing at which the event will be executed is displayed as “hours:min- utes:seconds:milliseconds.”

FEVENT

This area shows the type and value of the event. The type of events that can be selected in this area will depend on which of the buttons above has been pressed. When the SCENE/LIB button is on, the following events can be selected.

•SCENE .................Scene memories. The value at the right is the number of the scene that will be recalled.

•EQ.Lib. ................EQ libraries. The value at the right is the number of the EQ library that will be recalled.

•DY.Lib. ................Dynamics libraries. The value at the right is the number of the dynamics library that will be recalled.

•EF.Lib. ..................Effect libraries. The value at the right is the number of the effect library that will be recalled.

•CH.Lib. ................Channel libraries. The value at the right is the number of the channel library that will be recalled.

GCHANNEL

This shows the channel (input channels 1–24, monitor channels 1–16, stereo out- put channel, return channels 1/2) for which the event will be recalled. This will be blank if scene memory has been selected in 6.

5.Rotate the [DATA/JOG] dial to modify the value of the item where the cursor is located.

226 — Operation Guide