Yamaha AW4416 manual Writing the master

Chapter17—Mastering

Writing the master

Here’s how to use the mastering function to write the stereo track data to CD-R/ RW media.

1.Press the [MASTERING] key.

The MASTERING screen will appear in the display.

2.Hold down the [SHIFT] key and press the [F2] key (CD UNLOAD).

The tray of the CD-RW drive will open.

3.Place a CD-R/RW disc on the tray. Then hold down [SHIFT] and press the [F1] key (CD LOAD).

The tray will close.

4.Use the [DATA/JOG] dial to select the SCSI ID number of the AW4416’s internal CD-RW drive, and press the [ENTER] key.

In the MASTERING screen, you can access all stereo tracks (44.1 kHz sampling frequency) saved on the internal hard disk. Thus, it is not necessary that the ste- reo track be part of the current song.

— Operation Guide 259