Yamaha AW4416 PART menu, Erase, Delete, Copy, Move, Insert, T-COMPTime Compression/Expansion

Chapter9—Track and virtual track operations

PART menu

These commands edit data in units of parts. When using these commands, you will need to specify not only the track for editing, but also the editing start loca- tion (START) and end location (END).

❍ERASE

Erase the audio data of the selected part. Audio data following that part will not be affected.

❍DELETE

Delete the audio data of the selected part. Audio data following that part will move forward by the length of the deleted data.

❍COPY

Copy the audio data of the selected part to the specified location of the specified track. You can also specify the number of times the data will be copied, and the interval between copies. If audio data exists at the destination, you can specify whether the copied data will be inserted or overwritten.

❍MOVE

Move the audio data of the selected part to the specified location of the specified track. At this time, the audio data of the move source will be erased. If audio data exists at the destination, you can specify whether the moved data will be inserted or overwritten.

❍INSERT

Insert silence into the selected part. Audio data following that part will move backward by the length of the inserted data.

❍T-COMP (Time Compression/Expansion)

Compress or expand the length of the audio data in the selected track without affecting the pitch. The RATIO parameter specifies the amount of compression or expansion (50%–200%).

❍PITCH (Pitch Change)

Change only the pitch without affecting the length of the audio data of the selected part. The PITCH parameter specifies the change in semitones (maximum ±12 semitones) and the FINE parameter specifies the change in one-cent steps (maximum ±50 cents).

162 — Operation Guide