Yamaha AW4416 manual Press SEL key

Models: AW4416

1 280
Download 280 pages 30.97 Kb
Page 230
Image 230
7.Press [SEL] key 1.

Chapter14—Automix

4.Make sure that the button in the AUTOMIX field is displayed as “ENABLE.”

5.Move the cursor to the OVERWRITE field. Turn the PAN button and EQ button on, and the remaining buttons (FADER, CH ON) off.

6.Move the cursor to the on-screen REC button, and press the [ENTER] key.

7.Press [SEL] key 1.

Monitor channel 1 will be selected for recording.

You can use the [SEL] keys to select multiple channels for overwriting. However, operations of the [PAN]/[EQ] controls will be recorded only for the channel that you selected last by pressing the [SEL] key.

8.Press the top panel [PLAY] key to begin song playback.

Simultaneously with the start of song playback, the previously-recorded automix will also play back.

9.While listening to the song, operate the [PAN] control.

When recording pan or EQ operations in the automix, it is convenient to use the [PAN]/[EQ] controls at the right of the display.

Note

When you operate the [PAN] control and [EQ] controls, the pan and EQ settings of the corresponding channel will be displayed briefly in the upper part of the screen.

10.When you are finished, press the top panel [STOP] key.

Automix recording will stop, and a message will ask whether you wish to update the automix with the newly recorded content.

11.To update the automix with the newly recorded content, move the cur- sor to the OK button and press the [ENTER] key.

220

— Operation Guide

Page 230
Image 230
Yamaha AW4416 manual Press SEL key