Yamaha AW4416 manual Setting the PORT SELECT parameter, Press MIDI, and then press the F1 key

Chapter15—MIDI

❍Apple Macintosh series: 8-pin system peripheral cable

mini DIN 8-pin			1	2	(HSK i)	mini DIN 8-pin
	7						7
6		8	2	1	(HSK O)	6	8
3		5	3	5	(RxD -)	3	5
			4	4	(GND)
4						4
			5	3	(TxD -)
1	2		6	8	(RxD +)	1	2
			7	7	(GPI)
			8	6	(TxD +)

In the case of some Macintosh computers that have no modem/printer cable, it is not possible to make direct connections to the AW4416’s TO HOST connector.

Setting the PORT SELECT parameter

In order to use the TO HOST connector, the AW4416’s PORT SELECT parameter must be set appropriately for the type of computer that is selected.

1.Press [MIDI], and then press the [F1] key.

The MIDI Setup page will appear, allowing you to make MIDI-related settings for the AW4416.

2.Move the cursor to the PORT SELECT knob, and use the [DATA/JOG] dial to select the setting appropriate for your computer.

The following types of computer require the following PORT SELECT parameter settings.

•IBM/PC series: TO HOST PC 2 (38.4 kbps)

•Apple Macintosh series (models with modem/printer port): TO HOST MAC

•Depending on your system, you may need separate driver software in order to make serial port connections.

•When connecting to a Macintosh, you must set the MIDI interface clock set- ting of your application to 1 MHz.

234 — Operation Guide