Yamaha AW4416 manual Use the DATA/JOG dial to select the store destination scene number 01–96

Chapter13—Scene memory

2.Use the [DATA/JOG] dial to select the store destination scene number (01–96).

•Scene number 00 is for recall only, and cannot be stored.

•Be aware that if you select a previously-stored scene number and execute the Store operation, the previous scene will be lost.

3.Use the CURSOR []/[]/[ ]/[ ] keys to move the cursor to the STORE button in the screen, and press the [ENTER] key.

The TITLE EDIT popup window will appear, allowing you to specify the name of the scene (scene name).

4.Use the CURSOR []/[]/[ ]/[ ] keys and the [DATA/JOG] dial to specify the name of the scene.

For details on inputting characters, refer to page 60.

5.To store the scene, move the cursor to the OK button in the screen and press the [ENTER] key.

The scene will be stored, and the AW4416 will be in the same state as when the store destination scene number of step 2 is recalled. To cancel without storing the scene, move the cursor to the CANCEL button and press the [ENTER] key.

Tip!

•To prevent a stored scene from accidentally being overwritten, you can make memory protect settings for each scene number. For details refer to page 208.

•You can use the keys of the SCENE MEMORY section to store a scene even when you are in a screen other than the SCENE screen Scene Mem page. For details refer to page 211.

— Operation Guide 205