Yamaha AW4416 manual Repeat steps 3–4to set the remaining parameters

Chapter12—Sampling pads

❍INTERVAL

When copying multiple times, this parameter specifies the interval between copy destination patterns.

FR. START FR. END

Copy source pad track (FR. PAD)

COPY (TIMES= 3)

Copy destination pad track

(TO PAD)

TO START INTERVAL

❍INSERT

Specify whether the pattern will be inserted (Insert) or overwritten (OverWrite) at the copy destination.

❍EXECUTE

This button executes the Copy operation.

Tip!

•If you set the counter to measure units, you can set the FR. START, FR. END, and TO START parameters in measure/beat units.

•Instead of using the [DATA/JOG] dial to vary a location continuously, you can use the keys of the locate section to move instantly to a desired locate point or marker.

3.Move the cursor to the parameter whose setting you wish to change, and press the [ENTER] key.

The cursor will move to the parameter setting, and the value of the selected parameter will be displayed.

4.Use the [DATA/JOG] dial to set the parameter, and press the [ENTER] key.

The setting will change, and the cursor will return to the parameter location of step 3.

5.Repeat steps 3–4 to set the remaining parameters.

6.Move the cursor to the EXECUTE button and press the [ENTER] key.

A popup window will appear, asking you to confirm the Copy command.

200 — Operation Guide