Yamaha AW4416 manual REGION menu, Name, Erase, Delete, Copy, Move, Divide, Trim In, Trim Out

Chapter9—Track and virtual track operations

REGION menu

These commands edit data in units of regions.

❍NAME

Assign a name to a region.

❍ERASE

Erase the selected region. Audio data following that region will not be affected.

❍DELETE

Delete the selected region. Audio data following that region will move forward by the length of the deleted data.

❍COPY

Copy the selected region to the specified location of the specified track. You can also specify the number of times the data will be copied, and the interval between copies. If audio data exists at the copy destination, you can specify whether the copied data will be inserted or overwritten.

❍MOVE

Move the selected region to the specified location of the specified track. At this time, the move source region will be erased. If audio data exists at the move des- tination, you can specify whether the moved data will be inserted or overwritten.

❍DIVIDE

Divide the selected region into two at the location you specify.

❍TRIM IN

Trim the starting location of the selected region toward the end in sample units.

❍TRIM OUT

Trim the ending location of the selected region toward the beginning in sample units.

❍T-COMP (Time Compression/Expansion)

Compress or expand the length of the audio data in the selected track without affecting the pitch. The RATIO parameter specifies the amount of compression or expansion (50%–200%).

❍PITCH (Pitch Change)

Change only the pitch without affecting the length of the audio data of the selected region. The PITCH parameter specifies the change in semitones (maxi- mum ±12 semitones) and the FINE parameter specifies the change in one-cent steps (maximum ±50 cents).

— Operation Guide 163