Yamaha AW4416 manual EPad tracks, FCOPY/ERASE menu, GParameter value area

Chapter12—Sampling pads

EPad tracks

These tracks record the timing of the trigger events for each pad. The time from while you press the pad until you release it is shown as a bar graph.

FCOPY/ERASE menu

This menu accesses commands for copying/erasing previously-recorded trigger events. Move the cursor to the desired menu and press the [ENTER] key to access the list of commands.

GParameter value area

In this area you can set the parameters required to execute the command.

2.Use the [CURSOR] keys and the [ENTER] key to switch the R column of the pad(s) you wish to record from O to ●.

3.Start the recorder, and strike the pads while listening to the playback of the audio tracks.

Trigger events will be recorded on the corresponding pad track.

4.When you are finished performing, stop playback on the recorder.

Tip!

•You can also begin recording from the middle of the song.

•Immediately after recording, you can press the [UNDO] key to cancel trigger event recording.

— Operation Guide 197