Yamaha AW4416 manual Playing back automix

Chapter14—Automix

11.If you wish to update the automix with the newly recorded content, move the cursor to the OK button and press the [ENTER] key.

The automix will be updated. If you move the cursor to the CANCEL button and press the [ENTER] key, the recorded content will be discarded, and the automix will return to its previous state.

Note

•If in step 10 you move the cursor to the ABORT button and press the [ENTER] key, the recorded content will be discarded in the same way, and the automix will return to its previous state.

•Automix recording can also be stopped by using the on-screen STOP button instead of the [STOP] key. In this case, automix recording will stop, but the song will continue playing.

•Even after updating the automix content, you still move the cursor to the UNDO button in the right side of the screen, and press the [ENTER] key to return the automix to its state before recording (Undo). The front panel [UNDO] key cannot be used to undo automix.

Playing back automix

Here’s how to play back the recorded automix.

1. Press the [AUTOMIX] key → [F1] key.

On

Off

2.Make sure that the button in the AUTOMIX field is displayed as “ENABLE.”

If the button is displayed as “DISABLE,” move the cursor to the button, and press the [ENTER] key.

3.Make sure that the on-screen REC button and AUTO REC button are turned off.

If they are on, move the cursor to the corresponding button, and press the [ENTER] key.

4.Locate the song to a point slightly earlier than where you began record- ing automix, and press the top panel [PLAY] key.

218 — Operation Guide