Yamaha manual Basic operation of the AW4416, Accessing a screen/page, Using the mouse

Chapter3—The user interface of the AW4416

Basic operation of the AW4416

This section explains basic operation of the AW4416.

Accessing a screen/page

To operate the mix parameters of the AW4416 or to edit the internal settings, you must first access the desired screen in the display. If a screen contains two or more pages, you must then select the desired page.

❒Using the controls of the top panel

1.Press the key for the desired screen.

The keys of the WORK NAVIGATE, UNIT, MIXER, FADER MODE, RECORDER, and AUTOMATION sections of the top panel, and the [EDIT] key of the sample pad section each correspond to their own screens, which you can access by pressing the appropriate key.

Tip!

If a screen contains multiple pages, the most recently operated page will appear.

2.To switch pages within a screen, press the function key ([F1]–[F5] keys) that corresponds to the tab for the desired page.

Each tab corresponds to the following function key.

[F1 key] [F2 key] [F3 key] [F4 key] [F5 key]

Tip!

By repeatedly pressing the same key you pressed in step 1, you can cycle through the pages of the screen.

❒Using the mouse

1.Click the M (menu) button in the upper right of the screen.

The display access menu will appear. From this menu you can use the mouse to select screens.

56 — Operation Guide