Yamaha AW4416 KOPTION I/O slots 1/2, R Q P O N M L, U V W, LPHONES jack, MDIGITAL STEREO IN jack

Chapter2—Parts and their functions

KOPTION I/O slots 1/2

These slots allow optional I/O cards to be installed. Assignments for the signals input or output via the I/O cards are made in the SETUP screen → Patch IN page (→ P.133), and in the SETUP screen → Patch OUT page (→ P.136).

Note

For details on installing an I/O card, refer to page 14.

R Q P O N M L

TO HOST	SCSI	WORD CLOCK		DIGITAL STEREO		PHONES
		OUT	IN	OUT	IN
	MIDI			MOUSE		FOOT SW

		MTC OUT OUT/ THRU	IN
POWER
ON/ OFF	AC INLET
Z S	T	U V W		X	Y

LPHONES jack

This is a stereo headphone jack that allows a set of stereo headphones to be con- nected. This jack will always output the same signal as the MONITOR OUT jacks.

MDIGITAL STEREO IN jack

This is a coaxial jack that digitally inputs a stereo signal. It is compatible with the IEC958 consumer format. The channel to which this signal will be input is assigned in the SETUP screen → Patch IN page (→ P.133).

NDIGITAL STEREO OUT jack

This is a coaxial jack that digitally outputs the stereo signal assigned to D.ST OUT in the SETUP screen → Patch OUT page (→ P.136). It is compatible with the IEC958 consumer format.

OWORD CLOCK IN jack

PWORD CLOCK OUT jack

These are BNC type jacks for input/output of a word clock signal. They are used to synchronize the digital audio signal processing with an external device.

QSCSI connector

This is a D-sub half-pitch 50 pin SCSI connector that is compatible with the SCSI- 2 standard. SCSI-2 compatible storage devices can be connected for data backup.

48 — Operation Guide