Yamaha AW4416 manual Monitor output/headphone output, 1Initial state, BWhen the SOLO key is on

Chapter1—Welcome to the world of the AW4416

By defeating these assignments, you can insert internal effects 1/2 into any desired channel, or use AUX bus 7/8 or return channels 1/2 for other purposes.

AUX7 (EFF1),	2
AUX8 (EFF2)
INSERT SEND	46

SELECT

EFFECT

EFFECT

METER

METER

RETURN 1/2

X 2

Monitor output/headphone output

As monitoring jacks, the AW4416 provides MONITOR OUT jacks and a PHONES jack. The types of signal that are output from these jacks will change as follows, depending on the state of the AW4416.

1Initial state

The signal of the stereo output channel will be output without change from the MONITOR OUT jacks/PHONES jack.

BWhen the [SOLO] key is on

The signal of the channel selected by the [ON] key will be sent to the SOLO bus, and output from the MONITOR OUT jacks/PHONES jack. At this time, all other signals will be muted.

CWhen the TRACK [CUE] key is on

The direct output signal of the track selected by the [REC TRACK SELECT] key will be output from the MONITOR OUT jacks/PHONES jack.

DWhen the internal metronome function is on

The metronome signal will be mixed with the output signals of 1–3.

Tip!

•The same signal is always sent from the MONITOR OUT jacks and the PHONES jack. However, the level adjustment is independent; the output level of the MONITOR OUT jacks is adjusted by the [MONITOR OUT] control, and the output level of the PHONES jack is adjusted by the [PHONES] control.

•Whenever the [SOLO] key and the TRACK [CUE] key are both on, only the TRACK [CUE] key will be valid.

RECORDER DIRECT OUT 1

RECORDER DIRECT OUT 16

STEREO L

RECORDER

TRACK CUE

PHONESPHONES

STEREO R

SOLO L

SOLO R

METRONOME

	MIXER SOLO Logic
	Logic
	DA
ON	ATT

MONITOR

MONITOR OUT

L

+4dB

R

30 — Operation Guide