Yamaha AW4416 manual Saving a scene/song

Chapter5—Recording on the AW4416

Saving a scene/song

❒Saving a scene

If you wish to reproduce the mixer settings as well when you recall the current song at a later time, you must store the current mix parameters as a Scene.

1.Use the []/[] keys in the SCENE MEMORY section of the top panel to select the store destination scene number (01–96).

The currently selected scene number will appear in the upper right of the level meter/counter.

SCENE MEMORY

STORE RECALL

													MTC	SCENE
M			S		F	ms	WORD CLOCK			MTC	SCENE		MASTER
							44.1k 48k		LOCK	MASTER
							INT EXT		VARI	SLAVE	0	ESLAVE		E
										–dB
										FINE 2
										14	6		–dB	0
											20
										10	12		FINE	2
										20	42
										18	30
5	6	7	8	9	10	11	12 13	14	15	26 60		R
										16	L
										READY
										INPUT

Scene number 00 contains a preset recall-only scene that returns all mix parame- ters to their default state. For this reason, it is not possible to store a scene into number 00.

2.Press the SCENE MEMORY section [STORE] key.

The TITLE EDIT popup window will appear, allowing you to assign a name to the scene memory.

Tip!

If STORE CONFIRMATION is turned “OFF” in the UTILITY screen Prefer.1 page ([UTILITY] key → [F2] key), the scene will be stored directly to the specified scene number without displaying this confirmation popup window. This is more conve- nient if you will be repeatedly overwriting a scene onto the same scene number.

— Operation Guide 105