Yamaha AW4416 Input patch, Mic/Line Input, Option In, Sampling Pad, EFFECT 1/2, Digital Stereo In

Chapter1—Welcome to the world of the AW4416

Input patch

The input patch section is where input signals are assigned to input channels 1– 24 and return channels 1/2. The following types of input signal can be selected.

❍MIC/LINE INPUT

Input signals from analog INPUT jacks 1–8.

❍OPTION IN

Input signals from an I/O card installed in rear panel OPTION I/O slots 1/2. Up to 8 channels of signal can be input simultaneously from a single I/O card.

❍SAMPLING PAD

Output signals of pads 1–8 in the sampling pad section.

❍EFFECT 1/2

Return signals from internal effects 1/2.

❍DIGITAL STEREO IN

Input signals from the DIGITAL STEREO IN jack.

❍METRONOME

The playback of the internal metronome.

The following input signals can be assigned to each channel.

	Input channel 1–24	Return channel	Return channel
	(mono)	1 (stereo)	2 (stereo)
MIC/LINE INPUT	O	O	O
OPTION IN	O	O	O
SAMPLING PAD	O
EFFECT 1		O
EFFECT 2			O
DIGITAL STEREO IN	O	O	O
METRONOME	O

— Operation Guide 23