Yamaha AW4416 manual To stop playback, press the STOP key

Chapter17—Mastering

5.Move the cursor to the CD PLAY MODE button, and press the [ENTER] key.

The CD PLAY MODE button will change from OFF to ON, and track information for the CD-R/RW media in the drive will be displayed.

1

2

1Currently selected track number (TRACK column) and elapsed time (TIME column).

BTrack numbers on the disc (TRACK column) and their track times (TIME col- umn).

•CD-R media that has not been finalized cannot be played back.

•The counter in the level meters/counter section will not function while you are using the CD Play function.

6.Use the Locate section []/[] keys to select the track that you wish to play.

7.To begin playback, press the Transport section [PLAY] key.

The audio output of the CD-RW drive will be sent directly to the stereo bus. Use the STEREO fader to adjust the volume.

8.To stop playback, press the [STOP] key.

Tip!

While playback is stopped, you can press and hold the [REW]/[FF] keys to rewind or fast-forward. (However, there will be no sound.)

9.To exit the CD PLAY function, move the cursor to the CD PLAY MODE button and press the [ENTER] key.

•While the CD Play function is being used, all keys except for [ ]/[ ], [PLAY], [STOP], [REW]/[FF], and [ENTER] will have no effect.

•If you wish to perform other operations, turn off the CD Play function.

— Operation Guide 265