Yamaha AW4416 manual Inserting an effect into a desired channel, Patching

Chapter10—Internal effects

Inserting an effect into a desired channel

If you defeat their assignment to AUX 7/8, the AW4416’s internal effects can be inserted into a desired channel. As an example, here’s how effect 2 can be inserted into monitor channel 1.

❒Patching

Here’s how to release effect 2 from its assignment to AUX send 8, and use it as an insertion effect.

1.Press the [SETUP] key → [F1] (Patch IN) key.

The SETUP screen Patch IN page will appear in the display.

If the Patch IN tab is not assigned to the [F1] key, press the [SHIFT] key + [F1] key to switch the tab, and then press the [F1] key.

2.Move the cursor to the EFF2 parameter of the EFFECT PATCH area, and rotate the [DATA/JOG] dial.

A popup window will appear, asking you to confirm that you wish to disconnect effect 2 from AUX bus 8 and use it for insertion.

3.Move the cursor to the OK button and press the [ENTER] key.

In the EFFECT PATCH area, EFF2 will change to “INSERT.” Now the effect can be inserted into the desired channel.

— Operation Guide 171