Yamaha manual AW4416 word clock slave, Using a digital MTR as the word clock master

Chapter4—Connections and setup

❍Using a digital MTR as the word clock master (1)

This method uses a digital MTR as the word clock master, and causes the AW4416 to synchronize to the word clock included in the input signal from the digital I/O card. For this method, turn on one of the 1/2–7/8 buttons for the slot to which that digital MTR is connected.

OPTION

SLOT 1

AW4416

(word clock slave)

WORD CLOCK SOURCE= SLOT 1 1/2–7/8	OPTION
	SLOT 2

Sync Out

Word clock Digital MTR (word clock master)

Sync In

Digital MTR (word clock slave)

Word clock

•Set the digital MTR so that it will operate according to its own internal clock.

•If you are using two digital MTR units, connect the Sync Out jack of the first to the Sync In jack of the second as shown here, so that the second digital MTR will follow the first.

❍Using a digital MTR as the word clock master (2)

This method uses a digital MTR as the word clock master, and causes the AW4416 to synchronize to the word clock supplied from the word clock output jack of the digital MTR to the WORD CLOCK IN jack of the AW4416. For this method, turn on the WCLK IN button.

Word clock

Word Clock In		Word Clock Out	Sync Out
	OPTION	Digital MTR
	SLOT 1
		(word clock master)
AW4416			Sync In
(word clock slave)
WORD CLOCK SOURCE= WCLK IN	OPTION	Digital MTR
	SLOT 2

(word clock slave)

Word clock

•Set the digital MTR so that it will operate according to its own internal clock.

•If you are using two digital MTR units, connect the Sync Out jack of the first to the Sync In jack of the second as shown here, so that the second digital MTR will follow the first.

70 — Operation Guide