Yamaha AW4416 manual Saving a song

Chapter5—Recording on the AW4416

3.As desired, assign a scene name of up to 16 characters. (For details on inputting characters, refer to page 60.) When you are finished, move the cursor to the OK button and press the [ENTER] key.

The scene will be stored.

❒Saving a song

The current song will be saved automatically when you create a new song, load an existing song, or perform the shut-down procedure. However as a precaution against the power being accidentally turned off while you are working, it is a good idea to save your song frequently, and not just after completing the mix- down.

•When you save a song, the scene memory contents and only the scene num- ber (i.e., not the settings) of the most recently stored/recalled scene will be saved together with the song. Be aware that the current mix parameters are not saved.

•When an existing song is loaded, the scene number that was most recently stored/recalled for that song will be displayed in the upper right of the level meter/counter. If you wish to reproduce both the song and the mix parameters, you must press the SCENE MEMORY section [RECALL] key and recall that scene immediately after loading the song.

1.Press the WORK NAVIGATE section [SONG] key → [F1] key.

The SONG screen Song List page will appear.

The data for the current song (date, size, quantization bits, sampling frequency, protect) shown here in the song list is the data for when the song was last saved. When you perform the following Save procedure and press the [ENTER] key, it will be overwritten by the new data.

2.Move the cursor to the SAVE button at the bottom of the screen, and press the [ENTER] key.

106 — Operation Guide