Yamaha AW4416 manual Editing the name of a scene

Chapter13—Scene memory

Editing the name of a scene

Here’s how you can edit just the name of a stored scene.

1.Press the [SCENE] key → [F1] key.

The Scene Mem page of the SCENE screen will appear.

2.Use the [DATA/JOG] dial to select the scene whose scene name you wish to edit.

It is not possible to select a scene that has not been stored, a scene whose protect setting is on, or scene number 00.

3.Use the CURSOR []/[]/[ ]/[ ] keys to move the cursor to the TITLE EDIT button in the upper left of the display, and press the [ENTER] key.

The TITLE EDIT popup window will appear, allowing you to edit the scene name.

4.Use the CURSOR []/[]/[ ]/[ ] keys and the [ENTER] key to input the new scene name.

5.To finalize the edited scene name, move the cursor to the OK button and press the [ENTER] key.

The scene name will be updated. If you wish to cancel without changing the scene name, move the cursor to the CANCEL button and press the [ENTER] key.

— Operation Guide 207