ASSEMBLY
HOW TO ASSEMBLE THE HANDLE
1.Remove the packing material from the upper and lower handles.
2.Loosen the knobs on each side of the handle. (See Figure 3)
3.Raise the upper handle to the operating position (see Figure 4). Hold the upper handle apart to prevent scratching the lower handle.
Upper Handle | Chute Crank Rod |
| |
| Knob |
| Lower Handle |
| Figure 3 |
NOTE: Make sure the cables are not caught between the upper and lower handle.
4. Tighten the knobs.
Upper Handle
Knob
Lower Handle
Figure 4
HOW TO INSTALL THE CHUTE
1.Remove the three bolts and lock nuts from the chute base (see Figure 5).
2.Install the chute with the bolts and locknuts. Make sure the locknuts are to the outside as shown. Tighten securely.
| Locknuts |
Chute |
|
| Figure 5 |
1740274 | 11 |
Chute |
Figure 6 |
