SERVICE RECOMMENDATIONS
HOW TO LUBRICATE THE IDLER ARM
CAUTION: DO NOT get oil on the belt or pulleys. This will cause the belt to slip and experience premature failure.
1.Remove the screws from the belt cover (see Figure 12). Remove the belt cover.
2.Apply a drop of oil to the idler arm at point B (see Figure 13).
3.Pivot the auger bail up and down several times.
4.Wipe off the excess oil.
5.Install the cover.
Belt Cover |
Figure 12 |
Idler Arm |
B |
Figure 13 |
1740274 | 19 |
