Pioneer SX-LX70SW manual 10Copying and backup, Using Copy Lists, Cancelling One Touch Copy

O.T.

COPY

10Copying and backup

Cancelling One Touch Copy

You can cancel a One Touch Copy once it’s started.

• Press and hold for more than a second. Copying is cancelled and the video already copied is erased.

• If you cancel a HDD to DVD-R/+R copy, the space available for recording does not return to the pre-copy figure.

Notes on copying using One Touch Copy

Copying to DVD

•Title name, chapter markers, as well as thumbnail picture markers for the Disc Navigator, are also copied. However, if you copy to a DVD-R/-RW (Video mode) or DVD+R/+RW, only the first 40 characters of a name are copied.

•The chapter markers in the copy may not be in exactly the same positions as the original when recording on to a DVD-R/-RW (Video mode) or DVD+R/+RW.

•You can’t use the One Touch Copy function to copy a title if any part of the title is copy-once protected.

•A title that contains mixed aspect ratios can’t be copied to a DVD-R/-RW (Video mode) or DVD+R/ +RW. Use a DVD-R/-RW (VR mode) or DVD-RAM disc for this type of material.

•Low resolution (SEP through LP modes1) widescreen material can’t be copied to a DVD-R/-RW (Video mode) or DVD+R/+RW. Use a DVD-R/-RW (VR mode) or DVD-RAM disc for this type of material.

•When HDD Recording Format is set to Video Mode Off, titles recorded in LP/MN9 to MN15 modes cannot be high-speed copied to a DVD-R/-RW (Video mode) or DVD+R/+RW. Please use a DVD-R/-RW (VR mode) or DVD-RAM.

•Recordings of bilingual broadcasts cannot be high- speed copied to a DVD-R/-RW (Video mode) or DVD+R/+RW. Please use a DVD-R/-RW (VR mode) or DVD-RAM.

•XP+ titles cannot be copied to DVD via One Touch Copy.

•Titles over eight hours cannot be copied to single- layer DVD+R/+RW discs using One Touch Copy. Use DVD+R DL discs for titles over eight hours.

•Titles recorded in MN1 to MN6, SEP, SLP or EP mode cannot be copied to DVD+R/+RW using One Touch Copy.

Copying to the HDD

•The maximum title length for copying is 12 hours.

•Title name and chapter markers are also copied, except when copying from a finalized Video mode DVD-R/-RW.

•Thumbnail picture markers and chapter markers for the Disc Navigator are copied, but their position in the copy may be slightly changed from the original.

•If some part of the title being copied is copy-protected, copying will start, but the copy-protected portions will not be copied.

Using Copy Lists

* See also Copyright on page 127.

At its simplest, a Copy List is just a list of HDD or DVD titles that you want to copy. When copying HDD titles to DVD, you can, however, edit the titles in your copy list, erasing chapters you don’t need, or re-naming titles, for example. Edits you make to titles in the Copy List do not affect the actual video content; only the ‘virtual’ content of the Copy List. So you can freely erase and modify anything in your Copy List safe in the knowledge that the actual content is not being altered.

Copying from HDD to DVD

Important

•The recorder can only store one Copy List at a time.

•The Copy List is erased if the Input Line System setting is changed (see Additional information about the TV system settings on page 161).

•Resetting the recorder to its factory settings (see Resetting the recorder on page 175) will erase the Copy List.

1Load a recordable DVD.

•It is possible to complete the following steps without having a recordable DVD loaded (or having an uninitialized DVD loaded); however, the steps are slightly different.

•If you want to use a DVD-RW (VR mode) disc for the copy, make sure it is initialized before you start.

HOME

MENU

2 SETUP Select ‘Copy’ from the Home Menu.

Note

1 In manual recording mode these equate to MN1 to MN15 (Video Mode Off) or MN1 to MN8 (Video Mode On).

128

En