Pioneer SX-LX70SW manual Disc Setup menu Chapter, Basic settings, Initialize settings

The Disc Setup menu 13

Chapter 13

The Disc Setup menu

From the Disc Setup menu you can name discs, lock the contents to prevent accidental recording and erasure, initialize and finalize discs. The Disc Setup menu is accessed from the Home menu.

Basic settings

Input Disc Name

DVD (VR) DVD (Video) DVD+R DVD+RW DVD-RAM

When you initialize a disc for recording, the recorder automatically assigns a name for the disc ranging from DISC 1 to DISC 99. You can use the Input Disc Name function to change the default disc name to something more descriptive. This name appears when you load the disc and when you display disc information on-screen.

HOME

MENU

1	SETUP	Select ‘Disc Setup’ from the Home Menu.
	ENTER
2		Select ‘Basic’ > ‘Input Disc Name’ > ‘Next
Screen’.
		Disc Setup
		Basic	Input Disc Name	Next Screen
		Initialize	Lock Disc
		Finalize	DVD-RW Auto Init.
		Optimize HDD

Important

•A locked disc can still be initialized (which will completely erase the disc).

HOME

MENU

1	SETUP Select ‘Disc Setup’ from the Home Menu.
	ENTER
2	Select ‘Basic’ > ‘Lock Disc’ then ‘On’ or ‘Off’.
	Disc Setup
	Basic	Input Disc Name	On
	Initialize	Lock Disc	Off
	Finalize	DVD-RW Auto Init.
	Optimize HDD

Set to On to prevent accidental recording, editing or erasing of the disc loaded. If you need to unlock the disc to make edits, select Off.

DVD-RW Auto Initialize

DVD-RW

• Default setting: VR Mode

Initialization mode is automatically carried out when you insert a blank DVD-RW. You must set the desired initialization mode before inserting a disc.

See DVD-RW Auto Initialize on page 102 for detailed instructions.

	ENTER
3	Input a name for the disc.

The disc name can be up to 64 characters long for a VR mode disc, or 40 for a Video mode discs and DVD+R/+RW.

•See Title Name on page 120 for more on navigating the input screen.

Lock Disc

DVD (VR) DVD-RAM

• Default setting: Off

Locking the disc will prevent accidental recording, editing or erasing of the disc.

Initialize settings

DVD-R DVD-RW DVD+RW DVD-RAM

You can initialize a recordable DVD-R/-RW disc for either VR mode or Video mode recording.

The first time you load a new DVD-RW disc, it will be automatically initialized for recording according to the DVD-RW Auto Init. setting in the Disc Setup menu (see page 102).

New DVD-R discs are ready for Video mode recording when you load them, but it is also possible to initialize

them for VR mode recording.1

Note

1Once initialized for VR mode recording it is not possible to re-initialize the disc for Video mode recording. Also, once recorded in Video mode, the disc cannot be re-initialized for VR mode recording.

147

En