02Connecting up
Chapter 2
Connecting up
Receiver subwoofer
| HDMI |
|
|
|
|
OUT IN 3 | IN 2 | IN 1 |
|
|
|
| SYSTEM |
|
|
|
|
Rear panel |
| Side panel |
| ||
|
| HDMI |
|
|
|
OUT | IN 3 | IN 2 | IN 1 |
|
|
|
|
|
|
| ANTENNA |
|
|
| OUT 1 OUT 2 |
| AM LOOP |
|
|
| IN 1 IN 2 |
| |
|
|
| CONTROL | OPTICAL | FM |
|
|
|
| DIGITAL | |
|
|
|
| UNBAL 75 Ω | |
|
| SYSTEM |
|
|
|
1 | 2 | 3 | 4 | 5 | 6 |
Rear panel
1 HDMI OUT connector
Connect to a television that has an HDMI terminal.
2 HDMI IN connectors (x3)
Use
To select this input, choose HDMI 1 to HDMI 3.
3SYSTEM connector Connect to the display unit.
L |
|
|
|
|
|
|
|
| R | R | L | L | R | L |
|
R | FRONT | CENTER | FRONT | SURROUND SUBWOOFER | AC IN | ||
ANALOG | SPEAKERS (8 Ω) |
|
|
|
|
| |
|
|
|
|
|
|
| |
AUDIO IN |
|
|
|
|
|
|
|
7 | 8 | 9 | 10 |
4 CONTROL OUT jacks (x2)
Connect the supplied HDD/DVD recorder to the CONTROL OUT 1 jack with the supplied control cable. You can connect another component to the other Control Out jack.
5 DIGITAL OPTICAL IN jacks (x2)
To listen to optical digital audio, change the input to Digital 1 or Digital 2.
When the digital output jacks of your TV are connected to these jacks, set ‘TV Input’ (see page 46).
6AM LOOP antenna terminal
7FM antenna socket
Side panel
•There is a cover over the connectors on the side panel.
A.When making connections, lift the two hooks and remove the cover.
B.Once connections are finished, line up the three positions and place the cover back in its original position.
B
A
8 ANALOG AUDIO IN jacks
Handle sound from an external component by using stereo audio code. To listen to analog audio, change the input to Analog.
When the analog output jacks of your TV are connected to these jacks, set ‘TV Input’ (see page 46).
9 SPEAKERS terminals
Match the colours of the speaker cords to their respective connectors.
10 AC IN – Power inlet
Important
• You must connect the supplied HDD/DVD recorder with a control cable. If not, the HDD/DVD recorder may not operate properly.
8
En
