Pioneer SX-LX70SW manual Editing a timer programme, Press

05Using the digital electronic programme guide

Editing a timer programme

You can change any of the settings in a timer programme before the recording is due to start. Even if a programme is currently being recorded, you can program a new end time or edit its extend time parameter.

TIMER

1REC (LCD page 1) Press to display the Timer

Programme View screen.

You can also access the Timer Programme View screen from the Home Menu (press HOME MENU, select Timer Recording, then Timer Recording).

This screen shows all the timer programmes currently set.

Timer Programme View	SUN 25/3	15:00
VPS/PDC 0/8	Tmr Pgms	3/32
Manhattan Open Tennis	OK
SUN 25/3 18:00 – 19:00	Pr 4
World Journey	OK
MON 26/3 19:30 – 21:00	Pr 6
Flower	Until 20/4
MON – FRI 13:30 – 14:00	Pr 8
New Input
HDD Remain	59h59m(SP)
DVD Remain	1h59m(SP)

•Each row is for one timer recording programme, with the date and time information, channel, recording mode, DVD or HDD and recording status.

•The amount of free space available on the HDD and the currently loaded recordable DVD is shown towards the bottom of the screen.

•In the upper-right corner, the number of timer programmes already set is shown next to Tmr Pgms.

•If there are more than five timer programmes already

set, press (LCD page 1) to switch page (go back

using the button).

•You can also delete a timer programme before it’s started (before the recorder enters timer recording standby) by highlighting it and pressing CLEAR (LCD page 2). See also Deleting a timer programme on page 89.

2	Highlight the timer programme you want
to change.

If you want to set a new timer programme, select ‘New Input’ and skip to step 4.

	ENTER
3	Press	then select ‘Modify’ from the

command menu panel. Alternatively, press ENTER.

The Timer Programme Set screen appears from which you can edit the settings.

88

ENTER
4	Enter the timer recording settings.
Use the	buttons to select a field; use the

buttons to change the value. For more information on the options available at the Timer Programme Set screen, see Setting timer programmes on page 86.

	ENTER
5	After entering all the timer recording

information, highlight ‘Store Programme’ and press

ENTER.

The timer recording list screen is displayed again. The timer programme you just input appears in the list. The rightmost column shows various timer recording status messages:

•OK – Can be recorded.

•Time Over – Not enough space on the HDD (the recording won’t finish).

•Over 12h – Recording time of over 12 hours set (when recording to the HDD the recording will be split into two titles).

•Overlap – Two timer programmes partially or completely overlap. The one starting earlier will take priority.

•Until ... (eg., Until 13/8) – For a regular recording, the last programme that could be recorded is shown.

•Data Over – Can’t record because the disc management area of the disc is full.

•Cancel Once – A regular timer programme is set to skip.

•Can’t Rec – Not possible to record.

•Title Over – Can’t record because there is already the maximum number of titles on the disc (HDD: 999; DVD: 99).

•Recording – The programme is currently recording.

•Standby – The recorder is in timer recording standby.

•Valid Until ... (eg., Valid Until 13/8) (UK only) – When you have set to make a series recording of a programme that has no new scheduled broadcasts, the date displayed indicates the last day until which the scheduled programme settings remain valid. (If the programme is not broadcast for over 13 weeks, its settings are automatically deleted.)

•No Broadcast (UK only) – Displays when a programme for which you had the EPG Link set to On does not record because the date of the scheduled recording has already passed.

•nothing displayed – Another timer recording or copying is in progress.

HOME

MENU

6 SETUP Press to exit the timer recording screen.

En