11Additional information
Displayed Messages
Message | Description |
192kHz PCM | These messages are displayed when you operate a function incompatible with the audio |
SACD | source being played back. |
| |
DTS Express |
|
Dolby TrueHD |
|
Dolby D+ |
|
|
|
No MIC | Displays when you press MCACC when the MCACC setup mic is not connected. |
|
|
Muting | Displays when you press TEST TONE or MCACC while this unit is muted. |
|
|
2ch Only | An operation is prohibited because it is only applicable to 2 channel sources, while the |
| current source is a multichannel source. |
|
|
Exit | Appears when a menu is automatically exited after a set period of inactivity. |
|
|
HDMI Through | Displays when you change the Listening Mode, the volume level, or some sound settings |
| when the HDMI Mode is set to Through Mode. |
|
|
Unknown | The genre information for contents being played back on the HDD/DVD recorder cannot be |
| obtained. |
|
|
No Genre | There is no genre set for contents being played back on the HDD/DVD recorder. |
|
|
HDMI C.ERR 2C* | The connected component is not compatible with synchronized genre mode. |
|
|
Can’t use | • You tried to use Genre Sync Mode for a source component that does not support this |
| function. |
| • The source component is in a situation where Genre Sync Mode cannot be used. |
| • You tried to use Genre Sync Mode when the input source of this unit is a source other |
| than HDMI. |
| • The operation is forbidden due to the surround settings. |
| • When the volume level is over 51, some functions are restricted. |
|
|
HDMI C.ERR 1** | Check if the HDMI cable is properly connected. If the cable is properly connected, this unit |
| may be damaged. In such an event, please contact a |
| your nearest dealer. |
|
|
Noisy! | Background noise is too high to complete MCACC setup successfully. |
|
|
Error MIC! | An error occurred during MCACC setup because the microphone is not connected or is |
| not connected properly. |
|
|
Error Speaker! | An error occurred during MCACC setup because the speakers are not connected or are |
| not connected properly. |
|
|
Over Temp | Try lowering the volume. If this problem is not fixed by removing and inserting the power |
| cable, this unit may be damaged. In such an event, please contact a |
| service center or your nearest dealer. |
|
|
OC Error1 | Check whether the speaker cables are |
OC Error2 | displayed, contact your Pioneer authorized service center or your dealer for servicing. |
|
|
*** BackUpERR | Contact your Pioneer authorized service center or your dealer for servicing. |
|
|
52
En