Pioneer SX-LX70SW manual To see the progress of the backup, press Disp LCD

Copying and backup 10

4	ENTER
	Select ‘Start’.

Disc Back-up

Read from disc and save to HDD.

Start reading?

StartCancel

•To see the progress of the backup, press DISP (LCD page 3).

•You can cancel the backup process by pressing O.T. COPY (LCD page 3) for more than one second.

5When the data has been copied, take out the disc and load a blank* recordable DVD.

* If you’re using a DVD-RW or DVD+RW, the disc doesn’t have to be blank, although the previous contents of the disc will be erased in the backup process.

Disc Back-up

Disc content saved to Hard Disk Drive. Please eject the disc and load a recordable disc

StartCancel

You can use a DVD-R ver. 2.0, 2.1 or 2.2 disc, or DVD-RW ver. 1.1 or ver. 1.2 disc for the backup.

•If you backup a DVD-R disc to DVD-RW, you cannot undo the finalization later.

•Actual recordable capacity of discs vary so there may be cases where the contents of the disc you’re backing-up will not fit on to a particular blank disc. If this happens, please try another brand of disc.

•DVD-R/-RW discs can only be backed up to DVD-R/ -RW discs; DVD+R/+RW discs can only be backed up to DVD+R/+RW discs.

6Select ‘Start’ to start writing the backed-up data to the blank disc.

Disc Back-up

Write back-up data from Hard Disk Drive.

The disc contents will be overwritten.

OK to start?

StartCancel

•You can cancel the backup process by pressing O.T. COPY for more than one second. However, this will make the disc unusable (although if you are using a DVD-RW or DVD+RW disc you can re- initialize it in order to make it usable again — see Initializing recordable DVD discs on page 102.)

7After the recorder has finished recording the backup disc, you can select whether to make another backup of the same data or exit.

Disc Back-up

Disc back-up finished.

To make another back-up copy, please load a recordable disc.

StartCancel

•Select Start to make another backup copy or Cancel to finish. If you want to make another backup copy, return to step 6 above.

8If you don’t need to keep the backup data on the HDD, you can delete it now.

Select Yes to delete the data from the HDD; select No to keep it (you can delete it later if you want to).

Disc Back-up

The backed-up data is still on the HDD. Erasing it will increase the free space available. OK to Erase?

YesNo

•If you decide to leave the backup data on the HDD, you can make backup copies to recordable DVD discs anytime from the Disc Back-up menu.

• To see the progress of the backup, press DISP.

133

En