Pioneer SX-LX70SW manual HDMI mode setting, About HDMI, Other connections

Other connections

1Use an HDMI cable to connect the HDMI IN 1 to 3 interconnect on this receiver subwoofer to an HDMI output on your HDMI component.

Once this receiver subwoofer is properly connected to your HDMI component, the HDMI indicator (red) lights up on the display unit when you watch HDMI contents

2Use an HDMI cable to connect the HDMI OUT interconnect on this receiver subwoofer to an HDMI interconnect on a HDMI-compatible display.

•The arrow on the cable connector body should be facing right for correct alignment with the connector on the player.

3Use the HDMI 1 to 3 button to select the HDMI input you’ve connected to (for example, HDMI 2).

You can also use the display unit INPUT SELECTOR to carry out this operation.

•Set the HDMI Mode in HDMI mode setting below to Through Mode if you want to hear HDMI audio output from your TV or plasma television (no sound will be heard from this receiver).

•If the video signal does not appear on your TV or plasma television, try adjusting the resolution settings on your component or display.

HDMI mode setting

Specifies the routing of the HDMI audio signal out of this receiver subwoofer (amp) or through to a TV or plasma television. You cannot use a number of sound functions of this unit when HDMI Mode is set to Through Mode.

	Important
•	RCV Press to set the remote control to receiver
	control mode in order to operate the receiver
	subwoofer (make sure that the LCD displays the
	RECEIVER screen).
1	SETUP Press SETUP.
	ENTER
2	Select ‘HDMI Setup’ then press ENTER.
	ENTER
3	Select ‘HDMI Mode’, then press ENTER.

09

ENTER
4	Adjust the setting then press ENTER to
confirm.

•AMP Mode – Output an HDMI audio signal from this unit.

•Through Mode – Output an HDMI audio signal from a TV or plasma television.

The HDMI THROUGH indicator lights.

About HDMI

HDMI (High-Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD players, DTV, set-top boxes, and other AV devices. HDMI was developed to provide the technologies of High-bandwidth Digital Content Protection (HDCP) as well as Digital Visual Interface (DVI) in one specification. HDCP is used to protect digital content transmitted and received by DVI-compliant displays.

HDMI has the capability to support standard, enhanced, or high-definition video plus standard to multi-channel surround-sound audio. HDMI features include uncom- pressed digital video, a bandwidth of up to 2.2 gigabytes per second (with HDTV signals), one connector (instead of several cables and connectors), and communication between the AV source and AV devices such as DTVs.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

43

En