Pioneer SX-LX70SW manual Deleting a timer programme, Checking for alternative broadcast times

Using the digital electronic programme guide 05

Note

•If you set a DVD timer recording but there is no recordable DVD disc loaded, or the disc loaded doesn’t have enough free space for the complete recording, Recovery is shown. In this case (unless you load a suitable disc before the recording actually starts), the recorder will use the HDD for recording. (The message Can’t Rec will appear if there are already 999 titles on the HDD or if there is not enough free space on the HDD for recording.)

•When you have EPG Link or Series Recording set to On, any changes in broadcast time or division of broadcasts are automatically accommodated for and your scheduled recordings are carried out without any additional settings. As a result, even when you have not scheduled programmes to record at the same time, changes in broadcasting schedules can cause scheduled recordings to overlap.

Deleting a timer programme

You can delete timer programmes you no longer need.

	ENTER
3	Press	then select ‘Cancel Once’ from

the command menu panel.

•In the timer programme list, Cancel Once appears by the programme.

• You can also just press (Pause)(LCD page 1) when the timer programme is highlighted.

Checking for alternative broadcast times

(UK only)

You can check to see if a programme you have scheduled to record is airing at an alternative time slot1.

1	TIMER	Press TIMER REC (LCD page 1).
	REC
2		Highlight the timer programme you want

to search.

ENTER

1	TIMER	Press TIMER REC (LCD page 1).
	REC
2		Highlight the timer programme you want
to erase.

3 Press then select ‘Alternate Search’ from the command menu panel.

•The search results are displayed. Choose the programme you would like to record and press either the RED button or ENTER to schedule a recording.

	ENTER
3	Press	then select ‘Erase’ from the

command menu panel.

•Select Yes to confirm or No to cancel.

•You can also just press CLEAR (LCD page 2) when the timer programme is highlighted.

Searching for series

(UK only)

You can search for broadcasts of programmes of the same series as a programme you have scheduled to

record1.

1	TIMER	Press TIMER REC (LCD page 1).
	REC

Skipping a regular timer programme

If you’ve set a regular daily or weekly timer programme, you can set the recorder to skip the next scheduled recording.

1	TIMER	Press TIMER REC (LCD page 1).
	REC
2		Highlight the timer programme you want
to skip.

2	Highlight the timer programme you want
to search.
ENTER
3	Press then select ‘Series Search’ from

the command menu panel.

•The search results are displayed. Choose the programme you would like to record and press either the RED button or ENTER to schedule a recording.

Note

1 • Programme search results are based upon data provided by the broadcaster.

• This function may not be applicable to all programmes.

89

En