Pioneer SX-LX70SW manual Initial Setup menu

The Initial Setup menu 15

Setting	Options	Explanation
Digital Tuner
Replace Channels	Next Screen	Scans for digital channels and replaces all the channel presets with the
		results. Before the scan starts you will need to select your country.
		After the scan is complete the recorder tells you whether any new channels
		were found, and if so, how many.
		(You can cancel the scan before it has finished by pressing HOME MENU or
		RETURN. In this case, no channels are set.)

If you execute a Replace Channels command, any timer recordings set for D.TV channels will be erased.

Add New Channels	Next Screen	Automatically scans for new digital channels.
		After the scan is complete the recorder tells you whether any new channels
		were found, and if so, how many.
		(You can cancel the scan before it has finished by pressing HOME MENU or
		RETURN. In this case, no new channels are set.)
Channel Sort	Next Screen	Use this screen to sort channel presets into your prefered order. Use the
			buttons to highlight the channel you want to move, press
		ENTER. Use the cursor buttons again to highlight the position you want to
		move the channel preset to, then press ENTER again.
		(If there are more channel presets than will fit on one screen, you can select
		the next/previous page by highlighting the small triangular marks and
		pressing ENTER.)
Channel Options	Next Screen	From this screen you can skip or lock channels. Locked channels will require
		the correct password to be entered before the channel can be watched. Use
		the	buttons to highlight a preference box and press ENTER to
		toggle the preference.
		To enter this screen, input the parental lock password when prompted (if one
		has not yet been set then the password you enter becomes the parental lock
		password).
Auto Skip	Off •	No channels are automatically skipped.
	Radio	Radio channels are skipped when selecting channels.
	Data	Data channels are skipped when selecting channels.
	Radio & Data	Radio and data channels are skipped when selecting channels.
Signal Check	Next Screen	Use this screen to check the signal level and quality of digital channels. Use
		the	buttons to change the RF channel; select Add New Channels
		then press ENTER to scan for new channels; press HOME MENU to exit.
Aerial Power	On	Power is supplied to the connected aerial (antenna) when this recorder is on
		or in standby.
	Auto	Power is supplied to the connected aerial (antenna) only when this recorder
		is on.
	Off •	This recorder does not supply power to the connected aerial (antenna).

If the setting keeps reverting to Off when you try to set to On or Auto, the aerial may not be connected properly, or it may be shorted. In either case, check the connection and try making the setting again.

D.TV Language	Next Screen	From this screen you can set your Primary and Secondary Audio preference
		for multilingual digital broadcasts, your Primary and Secondary Subtitle
		preference for programmes that are broadcast with subtitles, and your
		Teletext language preference. Use the		buttons to highlight a field then
		use the	buttons to change it.

153

En