04Before you start
Basic operation
This manual is split into two parts, one covering using the receiver subwoofer, the other using the HDD/DVD recorder. Below are some common operations and where to find them explained in this manual.
Operating the remote control
The supplied remote control can control not only the receiver subwoofer and HDD/DVD recorder, but also other Pioneer products such as
To operate these components, orient the remote control toward the display unit.
Operating the receiver subwoofer
•RCV Press to display the RECEIVER screen. The RECEIVER screen is shown on the remote control’s LCD screen, and the remote is switched to Receiver mode.
RECEIVER | ||
SURR | ADV | F.S. |
SURR | SURR | |
Choosing and operating a source component
|
| HDMI |
|
|
|
1 | 1 | 2 | 3 | TV | LINE FM/AM |
Press to cycle through connected components. The selected component changes, and the LCD screen on the remote control changes to that of the appropriate component.
•To select input for Digital 1, Digital 2, Analog, Front Audio In, or iPod, press the LINE button until the desired input function is shown on the display unit.
2Choose the input source you are using when you have selected HDMI 1 to HDMI 3 or LINE.
The LCD screen changes to that for the selected component, and you can then operate the desired component.
•When the desired source cannot be found, or when you have a component not manufactured by Pioneer connected, press RCV to put the remote control into Receiver mode. The input for this unit remains unchanged.
Note
To temporarily control the receiver while listening to audio from a connected component on this unit, press RCV. The selected input will not change, and the remote changes to Receiver mode. To return to the previous operating mode, press RCV once more.
Using the LCD touch screen
Depending on the type of connected component you are operating (such as an HDD/DVD recorder), there may be multiple pages of information for the LCD touch screen. When the component you would like to control is not displayed, press PAGE to scroll to the page where the component you would like to control is located.
•When no operations are carried out for over 10 seconds, the display on the LCD touch screen of the remote control is automatically turned off. To have the display shown once again, either touch the LCD or press a button on the remote control.
Watching a DVD
Remember that when using the remote to control the supplied HDD/DVD recorder, you should point the remote towards the display unit, not the recorder itself.
RECEIVER
1
Switch on the receiver subwoofer.
2Set the remote control to HDD/DVR mode. The LCD screen changes to that for the HDD/DVD recorder, and you can then operate the desired component (see Choosing and operating a source component above).
| SOURCE |
3 | Switch on the HDD/DVD recorder. |
| TV |
4 | Switch on your TV. |
HDD/ | BD | DVD | |
DVR | |||
|
| ||
|
| EXIT |
HDMI input
HDD/ | BD | DVD | |
DVR | |||
|
| ||
TV |
|
| |
|
| EXIT |
LINE input
Turn on your TV and make sure that it is set to the HDMI video input.
5 | HDD/ | Press to select DVD. | |
DVD | |||
|
|
|
|
6 | OPEN/ |
| Press on the HDD/DVD recorder to open |
CLOSE |
| ||
the disc tray.
28
En
