Except VR mode: During playback, enter a chapter number then press ENTER to skip directly to that chapter within the currently playing title.
On some discs, you can also use the num- (LCD page 2) ber buttons to select numbered items in
the disc menu.
VR mode only: During playback, enter a title number then press ENTER.
All: Press CLEAR to clear a number entry and start again.
Press to start scanning. Press repeatedly to increase the scanning speed.
(LCD page 1)
Press to skip to previous/next chapter/title.
(LCD page 1)
|
|
| During playback, enter a title number then | |
1 | 2 | 3 | ||
press ENTER to skip directly to that title. | ||||
4 | 5 | 6 | Press CLEAR to clear a number entry and | |
7 | 8 | 9 | start again. | |
| 0 | CLEAR |
|
(Commercial back/skip)
Each press skips backward/ forward (LCD page 1) progressively up to a maximum of two
hours in either direction.
While paused, press and hold to start
(LCD page 1) change the playback speed.
While paused, press to advance a single frame in either direction.
TOP MENU MENU Press to display the menu of a 
disc. (DVD+R/+RW discs finalized on this
recorder will display the Disc Navigator. Press MENU to display the disc menu.)
Use the cursor buttons to navigate DVD-
ENTER 
Video disc menus; press ENTER to select 
items.
RETURN Press to return to the previous level of a 
Playing from the HDD
The table below shows the basic playback controls when playing video recorded on the hard disk (HDD).
Press to start playback.
If RESUME is displayed
Playback automatically stops after the end of a title is reached.
Press to stop playback.
You can resume playback from the same (LCD page 1) point by pressing (Play). (Press (Stop)
again to cancel the resume function.)
Pauses playback, or restarts playback when paused.
(LCD page 1)
(LCD page 2)
ENTER
CM | CM | (Commercial back/skip) | |
Each press skips backward/ forward | |||
BACK | SKIP | ||
(LCD page 1) | progressively up to a maximum of two | ||
|
| hours in either direction. | |
|
|
| |
|
| While paused, press and hold to start | |
(LCD page 1) | |||
change the playback speed. | |||
|
| While paused, press to advance a single | |
|
| frame in either direction. | |
|
|
| |
Playing CDs and WMA/MP3 discs
The table below shows the basic playback controls for Audio CDs1, and WMA/MP3 files.
Press to start playback.
(LCD page 1)
Press to stop playback.
(LCD page 1)
Pauses playback, or restarts playback when paused.
(LCD page 1)
Press to start scanning. Press again to increase the scanning speed. (There are
(LCD page 1) two scan speeds; the current scan speed is shown
Press to skip to previous/next track.
(LCD page 1)
Note
1 If you want to play a DTS Audio CD, make sure the recorder is connected to a
will be output through the analog outputs. Also make sure that STEREO is selected using the 
button (LCD page 3) (see Switching audio channels on page 111).
104
En
