Pioneer SX-LX70SW 10HDMI Control Chapter, Making the HDMI Control connections, Receiver, Surr

10HDMI Control

Chapter 10

HDMI Control

By connecting this unit to an HDMI Control-compatible Pioneer plasma television or the HDD/DVD recorder with an HDMI cable, you can control this unit from the remote control of a connected plasma television, as well as have the connected plasma television automatically change inputs in response to operations carried out on this unit.

Refer to the operating instructions for your plasma television for more information about which operations can be carried out by connecting via HDMI cable.

•You cannot use this function with components that do not support HDMI Control.

•We cannot guarantee this unit will work with HDMI Control-compatible components other than those made by Pioneer.

Important

Making the HDMI Control connections

You can use synchronized operation for a connected plasma television and up to three other components (including a maximum of two recorders or players).

Be sure to connect the plasma television’s audio cable to the audio input of this unit.

•If you use a commercially available HDMI cable, check whether the cable supports the HDMI 1.3 standard. Otherwise, the HDMI Control function may not operate properly.

DIGITAL

AUDIO OUT

		AC IN
	HDMI OUT	COAXIAL
ANTENNA(DIGITAL)
OUT	IN
5 V	30 mA

•RCV Press to set the remote control to receiver control mode in order to operate the receiver subwoofer (make sure that the LCD displays the RECEIVER screen, as shown below).

RECEIVER
SURR	ADV	F.S.
	SURR	SURR

HDMI

OUT

Rear panel

HDMI

OUT IN 3 IN 2 IN 1

IN 1 IN 2

OPTICAL

DIGITAL

SYSTEM

or

From digital audio output (optical)

HDD/DVD Recorder SDVR-LX70D

Receiver subwoofer

Side panel

ANTENNA	L
AM LOOP
	R
FM
UNBAL 75 Ω	ANALOG
	AUDIO IN

From Audio output

To HDMI input

HDMI Control-compatible

Pioneer plasma television

44

En