Assembly, Operations, Getting ready, Pre-treating

Assembly

Assembling your portable machine is a simple process.

1.Slide the flex hose clip into the opening on the front of the machine. You will hear a “snap”

when it is locked into place.	1.

2.Snap the hose grip bracket into the back of the machine on the clean tank side. Wrap the flex hose around the unit and snap hose grip into bracket.

3.Attach the cord wrap by snapping it into place on the collection tank side of the machine. Wrap the power cord around the cord wrap. Snap the second tool storage (select models) into the back of the machine between the cord

wrap and hose grip bracket.

Operations

WARNING

Do not plug in your vacuum cleaner until you are familiar with all instructions and operating procedures.

Getting ready

1.To fill the clean water/solution tank

a. Remove the tank by lifting it straight up and away from the unit.

b. Pull on the black tab to reveal tank opening. The plug rotates out of the way for easy filling.

c. Your tank is marked for a large stain or a small stain. Based on your cleaning need, fill with hot tap water to the water fill line. Add BISSELL 2X formula to the formula fill line.

DO NOT BOIL OR MICROWAVE WATER.

d. Replace the plug by rotating into place and pressing gently onto tank.

e. Replace the tank by lining up tank bottom with indentations on machine. Press down firmly on tank to secure in position.

2.Release the flex hose from the hose grip bracket. Unwrap flex hose completely from around the unit.

3.Select desired tool for spot cleaning. Insert tool on end of hose until it clicks into place.

4.Twist the Quick Release™ cord wrap clockwise to unwrap the power cord completely.

1a.1b.

1e.

Pre-treating

Cleaning effectiveness will be enhanced if you pre-treat heavily stained or highly soiled areas. Here’s how to do it:

1.Hold the cleaning tool just above the surface of the carpet or upholstery to be cleaned. When using the Deep Reach Tool (select models), keep the tool in contact with the carpet while spraying. Press the trigger to release a spray of cleaning solution directly onto the soiled area.

2.Wait 3-5 minutes before cleaning.