Bolens 24A-060F063 manual Important Safe Operation Practices, Training, Preparation

Page 3

SECTION 1: IMPORTANT SAFE OPERATION PRACTICES

WARNING: This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury. When you see this symbol - heed its warning.

WARNING: Engine Exhaust, some of its constituents, and certain vehicle

components contain or emit chemicals known to State of California to cause cancer and birth defects or other reproductive harm.

DANGER: This machine was built to be operated according to the rules for safe operation in this manual. As with any type of power equipment, carelessness or error on the part of the operator can result in serious injury. This machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death.

TRAINING

1.Read, understand, and follow all instructions on the machine and in the manual(s) before attempting to assemble and operate. Keep this manual in a safe place for future and regular reference and for ordering replacement parts.

2.Be familiar with all controls and their proper operation. Know how to stop the machine and disengage them quickly.

3.Never allow children under 16 years old to operate this machine. Children 16 years old and over should read and understand the operation instructions and safety rules in this manual and should be trained and supervised by a parent.

4.Never allow adults to operate this machine without proper instruction.

5.Keep bystanders, helpers, pets, and children at least 75 feet from the machine while it is in operation. Stop machine if anyone enters the area.

6.Never run an engine indoors or in a poorly ventilated area. Engine exhaust contains carbon monoxide, an odorless and deadly gas.

7.Do not put hands and feet near rotating parts or in the feeding chambers and discharge opening. Contact with the rotating impeller can amputate fingers, hands, and feet.

8.Never attempt to unclog either the feed intake or discharge opening, remove or empty vacuum bag, or inspect and repair the machine while the engine is running. Shut the engine off and wait until all moving parts have come to a complete stop. Disconnect the spark plug wire and ground it against the engine.

PREPARATION

1.Thoroughly inspect the area where the equipment is to be used. Remove all rocks, bottles, cans, or other foreign objects which could be picked up or thrown and cause personal injury or damage to the machine.

2.Always wear safety glasses or safety goggles during operation or while performing an adjustment or repair, to protect eyes. Thrown objects which ricochet can cause serious injury to the eyes.

3.Wear sturdy, rough-soled work shoes and close- fitting slacks and shirts. Loose fitting clothes or jewelry can be caught in movable parts. Never operate this machine in bare feet or sandals. Wear leather work gloves when feeding material in the chipper chute.

4.Before starting, check all bolts and screws for proper tightness to be sure the machine is in safe working condition. Also, visually inspect machine for any damage at frequent intervals.

5.Maintain or replace safety and instructions labels, as necessary.

6.To avoid personal injury or property damage use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive. Serious personal injury can occur when gasoline is spilled on yourself or your clothes which can ignite. Wash your skin and change clothes immediately.

a.Use only an approved gasoline container.

b.Extinguish all cigarettes, cigars, pipes, and other sources of ignition.

c.Never fuel machine indoors.

d.Never remove gas cap or add fuel while the engine is hot or running.

e.Allow engine to cool at least two minutes before refueling.

f.Never over fill fuel tank. Fill tank to no more than 1/2 inch below bottom of filler neck to provide space for fuel expansion.

g.Replace gasoline cap and tighten securely.

h.If gasoline is spilled, wipe it off the engine and equipment. Move machine to another area. Wait 5 minutes before starting the engine.

3

Image 3
Contents OPERATOR’S Manual Calling Customer Support Table of ContentsFinding Model Number Engine InformationImportant Safe Operation Practices TrainingPreparation Operation Maintenance and StorageLoose Parts In Carton See Figure Disconnecting Spark Plug WireAssembling Your Yard Vacuum Removing Unit From CartonAttaching The Hose Assembly Attaching The HandleAttaching The Bag Attaching The Blower Chute If Equipped Know Your Yard VacuumStarting Engine Operating Your Yard VacuumStopping Engine Gas And Oil Fill-UpUsing the Nozzle Vacuum Using the Hose AssemblyTo Remove Blower Chute Nozzle Height Adjustment Customer ResponsibilitiesLubrication Removing The Flail Screen MaintenanceStoring Your Yard Vacuum Problem Cause Remedy TroubleshootingModel 24A-060F063 Part Description Model 24A-060F063 Impeller Assembly 781-0735 Pin Clip 719-0329 Page Page MANUFACTURER’S Limited Warranty for

24A-060F063 specifications

The Bolens 24A-060F063 is a lawn tractor that embodies the perfect blend of durability, performance, and ease of use. Designed for residential users, it offers features that cater to both small and large lawn areas, making it a versatile machine for any homeowner.

At the core of the Bolens 24A-060F063 is its powerful engine. It is equipped with a robust 24 horsepower horsepower engine, delivering the necessary power to tackle various mowing tasks. The engine not only provides ample torque but also ensures smooth operation, allowing for extended mowing sessions without overheating or breakdown.

One of the standout features of this lawn tractor is its 42-inch cutting deck. This relatively compact size allows for maneuverability around obstacles in gardens and landscapes while still covering a generous area in each pass. The cutting deck also includes adjustable cutting heights, allowing users to customize their lawn’s appearance according to their preferences. With a choice of multiple height settings, homeowners can achieve that perfectly manicured look without hassle.

The Bolens 24A-060F063 incorporates several advanced technologies for enhanced user experience. The hydrostatic transmission system allows for infinite speed control, meaning that users can easily adjust their speed without the need for manual gear changes. This feature is particularly beneficial for navigating around tight corners and ensuring an even cut across varied terrain.

Furthermore, the tractor comes with an ergonomic seat designed for comfort during longer mowing sessions. The easy-to-reach controls are intuitively placed, enabling users to operate the tractor efficiently without straining. This consideration for user comfort makes it enjoyable to use, whether for routine lawn maintenance or tackling overgrown areas.

Another notable characteristic is the tractor's sturdy construction. Built with solid materials, it promises longevity and reliability, even when exposed to harsh weather conditions. The durability is complemented by the tractor's low maintenance needs, making it a convenient option for busy homeowners.

In conclusion, the Bolens 24A-060F063 is an efficient and reliable lawn tractor that combines power, advanced technology, and user-friendly features, making it an ideal choice for homeowners looking to maintain their lawns with ease. Its impressive cutting performance, comfortable design, and sturdy build ensure a satisfying mowing experience. Whether you have a small yard or a larger plot, this lawn tractor stands ready to help you achieve a lush and beautifully manicured lawn.