Operating Your Yard Vacuum, Stopping Engine

Chipper Chute

Allow twigs and small branches up to 1 1/2” in diameter to be fed into the impeller for chipping.

Blower Chute (If Equipped)

When attached to unit the blower chute is used to blow or scatter yard waste such as leaves, pine needles, or small twigs across yard.

Nozzle Height Adjustment Lever

Used to adjust the nozzle ground clearance ranging approximately 5/8” to 4 1/8”.

Nozzle

Yard waste such as leaves or pine needles can be vacuumed up through the nozzle for shredding.

Hose Handle

Used to guide hose assembly when vacuuming.

Nozzle/Hose Vac Handle

The nozzle/hose vac handle is located on top of the nozzle and it is used to regulate the vacuum between the nozzle and the hose assembly.

Throttle Control Lever (Not Shown)

The throttle control lever is located on the engine. It controls the engine’s speed and stops the engine. See separate engine manual packed with unit for details.

Engine Controls

See the separate engine manual for the location and function of the controls on the engine.

Hose Assembly

Used as an alternative to the nozzle to vacuum yard waste such as leaves or pine needles in hard to reach places.

Stopping Engine

•Move throttle control lever to STOP or OFF position.

•Disconnect spark plug wire from spark plug and ground against the engine.

SECTION 4: OPERATING YOUR YARD VACUUM

WARNING: The operation of the Yard Vacuum can result in foreign objects being thrown into the eyes, which can damage your eyes severely. Always wear the safety glasses provided with this unit or eye shields before chipping or blowing and while performing any adjustments or repairs.

Gas And Oil Fill-Up

Service the engine with gasoline and oil as instructed in the separate engine manual packed with your Yard Vacuum. Read instructions carefully.

WARNING: Never fill fuel tank indoors with engine running or until the engine has been allowed to cool for at least two minutes after running.

Starting Engine

•Attach spark plug wire to spark plug. Make certain the metal cap on the end of the spark plug is fastened securely over the metal tip on the spark plug.

•Make sure safety switch wire is connected to engine and properly grounded.

•Engines with choke lever:

Move choke lever on engine to CHOKE position. (A warm engine may not require choking).

•Engines with primer:

Prime engine as instructed in separate engine manual.

•The throttle control is located on the engine. Move engine throttle control lever to FAST or ON position.

•Stand behind unit, grasp starter handle and pull rope out slowly until engine reaches start of compression cycle (rope will pull slightly harder at this point).

•Pull rope with a rapid, continuous, full arm stroke. Keep a firm grip on starter handle. Let rope rewind slowly.

•Repeat previous steps until engine fires. When engine starts, move choke control (if equipped) gradually to RUN position.

WARNING: Never run the engine indoors or in a poorly ventilated area. Engine exhaust contains carbon monoxide, an odorless and deadly gas.

To Empty Bag

•Unhook bag straps from the lower handle and unsnap bag clip from the top of lower handle. See Figure 7.

•Grasp bag handle with one hand and pull lock rod on mounting bracket with other hand toward engine to release.

•Remove bag from rim of the discharge opening. Refer to Figure 4.

•Twist the two buttons on the back of the bag to unlock and empty contents. See Figure 7.

24A-060F063 specifications

The Bolens 24A-060F063 is a lawn tractor that embodies the perfect blend of durability, performance, and ease of use. Designed for residential users, it offers features that cater to both small and large lawn areas, making it a versatile machine for any homeowner.

At the core of the Bolens 24A-060F063 is its powerful engine. It is equipped with a robust 24 horsepower horsepower engine, delivering the necessary power to tackle various mowing tasks. The engine not only provides ample torque but also ensures smooth operation, allowing for extended mowing sessions without overheating or breakdown.

One of the standout features of this lawn tractor is its 42-inch cutting deck. This relatively compact size allows for maneuverability around obstacles in gardens and landscapes while still covering a generous area in each pass. The cutting deck also includes adjustable cutting heights, allowing users to customize their lawn’s appearance according to their preferences. With a choice of multiple height settings, homeowners can achieve that perfectly manicured look without hassle.

The Bolens 24A-060F063 incorporates several advanced technologies for enhanced user experience. The hydrostatic transmission system allows for infinite speed control, meaning that users can easily adjust their speed without the need for manual gear changes. This feature is particularly beneficial for navigating around tight corners and ensuring an even cut across varied terrain.

Furthermore, the tractor comes with an ergonomic seat designed for comfort during longer mowing sessions. The easy-to-reach controls are intuitively placed, enabling users to operate the tractor efficiently without straining. This consideration for user comfort makes it enjoyable to use, whether for routine lawn maintenance or tackling overgrown areas.

Another notable characteristic is the tractor's sturdy construction. Built with solid materials, it promises longevity and reliability, even when exposed to harsh weather conditions. The durability is complemented by the tractor's low maintenance needs, making it a convenient option for busy homeowners.

In conclusion, the Bolens 24A-060F063 is an efficient and reliable lawn tractor that combines power, advanced technology, and user-friendly features, making it an ideal choice for homeowners looking to maintain their lawns with ease. Its impressive cutting performance, comfortable design, and sturdy build ensure a satisfying mowing experience. Whether you have a small yard or a larger plot, this lawn tractor stands ready to help you achieve a lush and beautifully manicured lawn.