Bissell 48K2 Maintenance and care, Cleaning the pre-motor filter, Washable Pre Motor Filter

Page 10

Maintenance and care

Cleaning the pre-motor filter

The pre-motor filter protects the motor from dirt and dust particles.

1.Unplug the vacuum from electrical outlet.

2.Disconnect hose

3.Open the dust bag compartment by lifting up on the latch on the door at the front of the vacuum. Lift out the dust bag holder and dust bag.

4.Remove the filter frame from the filter holder by grasping the lip of the frame and pulling up.

5.Remove the filter from the filter frame and clean by hand washing in warm water. A mild detergent can be used if desired. Allow the filter to air dry thoroughly before replacing.

6.Place the filter back into the filter frame and replace back into the filter holder.

NOTE: The filter frame should be placed so the protective frame is visible.

7.Place dust bag holder and dust bag into the dust bag compartment, making sure the entire bag is tucked in below the seal gasket.

8.Close dust bag compartment door and press down gently until it locks into place.

9.Reconnect hose.

10 w w w . b i s s e l l . c o m

NOTICE:

This product is intended for household use only and not for commercial or industrial use. Vacuuming of dust from products like plaster, concrete or ashes will damage the motor and void the warranty.

Washable Pre-

Motor Filter

3.

Tip:

For maximum cleaning performance, check the filters often and clean or replace if necessary.

WARNING:

Do not operate cleaner with damp or wet filters or without all filters in place.

ug110-4075_48K2_1208.indd 10

12/22/08 10:16:28 AM

Page 9 Page 11
Image 10
Page 9 Page 11
Contents CleanAlong Thanks for buying a Bissell CleanAlong Canister Vacuum Important Safety Instructions Tool Holder Assembling your vacuum Operations Special toolsMotorized powerhead Power cordPower button Variable suction power controlHandle position Variable height adjustmentsUpright For storage and above floor cleaning with tools High filtration dust bagDust bag replacement Bag change indicatorReconnect hose Cleaning the pre-motor filter Maintenance and careWashable Pre Motor Filter Replacing the post-motor Hepa media filter Replacing the drive belt Cleaning the motorized powerheadIs best to remove the brush Possible causes Authorized service representativePossible causes Remedies Bissell Consumer Services Monday Friday203-7309 Barefloor Tool 203-7310 Floor Brush 203-7315 Replacement parts Bissell CleanAlong203-7270 Dust Bag 3pk 203-7268 Pre-Motor Filter 203-7269 203-7314Website or E-mail Warranty Bissell CleanAlong Canister VacuumUse the Customer Services tab Or Call
Related manuals
Manual 16 pages 62.56 Kb

48K2 specifications

The Bissell 48K2 is a versatile and efficient carpet cleaner designed to tackle stubborn stains and maintain the freshness of carpets and upholstery. This model stands out for its innovative features and user-friendly design that cater to the needs of homeowners seeking effective cleaning solutions.

One of the main features of the Bissell 48K2 is its powerful suction capabilities. The cleaner utilizes a robust motor that provides strong suction power, ensuring that dirt, pet hair, and other debris are effectively lifted from carpets and upholstery. This high level of suction is essential for deep cleaning, allowing users to achieve professional-grade results without the need for external services.

A notable technology integrated into the Bissell 48K2 is its Heatwave Technology. This feature helps maintain optimal water temperature throughout the cleaning process, ensuring that the cleaning solution is effective at combating tough stains. The consistent heat enhances the cleaning solution's efficacy, making it easier to lift embedded dirt and grime from fibers.

The Bissell 48K2 also showcases a user-friendly design. It comes equipped with an easy-to-fill water tank, allowing users to spend more time cleaning and less time refilling. Additionally, the cleaner features a large capacity tank that minimizes the need for frequent changes, which is particularly beneficial for larger homes or extensive cleaning tasks. With a lightweight design, the Bissell 48K2 is easy to maneuver, making it accessible for all users, regardless of strength or experience.

Another important characteristic of the Bissell 48K2 is its array of specialized tools. It comes with a variety of attachments, including a tough stain tool and an upholstery tool, designed to tackle different surfaces and types of stains. These tools enhance the cleaner's versatility, allowing users to address not only carpets but also furniture, curtains, and even vehicles.

Lastly, the Bissell 48K2 is designed with a focus on ease of maintenance. It features a detachable nozzle that simplifies the cleaning process, allowing users to quickly remove and rinse various components. This feature ensures that the machine remains in optimal working condition for years to come.

In summary, the Bissell 48K2 is a powerful carpet cleaner that combines advanced technology with user-friendly design elements. Its strong suction, Heatwave Technology, lightweight body, specialized tools, and easy maintenance make it a top choice for homeowners looking to maintain pristine carpets and upholstery.
Top Page Image Contents