Assembly
Your Steam & Sweep assembles quickly and easily. The only tool you will need for assembly is a Phillips head screwdriver.
Your Steam & Sweep is packaged with the following items:
Handle Assembly
Lower Body with Water Purification System
Maneuverable Swivel Head Removable Water Tank
1 large Phillips Head Screw
1 small Phillips Head Screw
2 Mop Pads
Attach handle to Steam & Sweep
1. Attach lower body to maneuverable | 1. |
swivel head (If your Steam & Sweep |
|
came with the swivel head already assembled to the body, you may skip this step).
2.Secure maneuverable swivel head with small Phillips head screw. Tighten until secure.
3.Slide handle assembly down into lower body until it will go no further.
4. Secure the handle by placing the large | 3. |
Phillips head screw through the screw opening in the lower body and into the rear of the handle assembly. Tighten with screwdriver until secure.
5.Slide water tank onto lower body by lining up vertical glides and gently sliding tank into place.
Steam & Sweep assembly is now complete. | 5. |
2.
4.
5
w w w. b i s s e l l . c o m