Operations
Power Switch
The power switch is located on the left side of the vacuum. Push the rocker switch “ON” (1) to vacuum, and “OFF”
(0) when cleaning is complete.
Handle position
Press the handle release pedal, located on the lower left side of the vacuum, with your foot to place your vacuum into one of three cleaning positions.
1.Upright- For storage and above floor cleaning with tools.
2.Normal Cleaning- Press handle release pedal once. Use for most household floor cleaning tasks.
3.Low Cleaning- With the vacuum in normal cleaning position, press handle release pedal again. Use for reaching under low furniture such as tables, chairs and beds.
Pet Hair Lifter
Use to pick up pet hair from carpeted surfaces. Just vacuum like you normally would. The vacuum will grab pet hair when you pull back and it will release hair and suction it up when you push forward.
Transporting cleaner
To move your vacuum from room to room, put the handle in the upright position, tilt the vacuum back on its rear wheels and push forward.
The vacuum can also be moved by using the carry handle.
6 w w w . b i s s e l l . c o m
caution:
Before using your vacuum, make sure that the dirt container is in locked position and that all filters (inner circular, outer circular,
Pet Hair Lifter 
12