Bissell 37N1 warranty Cleaning the foam motor and Hepa media filter, Thermal Protector

Page 9

Maintenance and care

Cleaning the foam motor and HEPA media filter*

1.Unplug the vacuum from electrical outlet.

2.The foam motor filter protects the motor from dirt particles. It is located in the slide out tray underneath the dirt con- tainer. If the filter becomes dirty, pull out the tray, lift out the foam filter pad and clean it.

NOTE: The foam motor filter may be hand washed in cold water with mild detergent. Rinse well and air dry thoroughly before replacing.

3.The HEPA media filter* is a H13 filter, which assists in the filtration process to return clean air to the room. It is located beneath the pre-motor filter in the slide out tray housed underneath the dirt container. If the filter becomes dirty, remove the tray, remove and replace the HEPA media filter*.

NOTE: The HEPA media filter* is white pleated filter. This filter is NOT washable and must be replaced when it becomes dirty

Thermal Protector

An internal thermal protector has been designed into your vacuum toprotect it from overheating. When the thermal protector activates, the vacuum motor will stop operating. If this happens:

1.Turn the vacuum OFF and unplug from electrical outlet.

2.Empty the dirt container, check filters and air passages for dirt accumulation.

3.The thermal protector automatically resets after approximately one hour. If the thermal protector does not reset, call BISSELL Consumer Services.

WARNING:

Do not operate cleaner with damp or wet filters or without all filters in place.

NOTICE:

This product is intended for household use only and not for commercial or industrial use. Vacuuming of dust from products like plaster, concrete or ashes will damage the motor and void the warranty.

2Foam-motor Filter

Filter (under foam motor filter)

*The Filter Media, not the vacuum as a whole, complies with the High Efficiency Particulate Air (HEPA) filter specification (EN 1822-1:2009).

9

w w w . b i s s e l l . c o m

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Users Guide Thanks for buying a Bissell Cleanview Compact Dual Cyclonic Reduce the risk of fire, electric shock, or injury Important Safety InstructionsProduct view Assembly Attach handle to vacuumAttach vacuum hose and tools Transporting cleaner Power Switch Operations Handle positionSpecial tools Power cordEmptying dirt container Maintenance and careThermal Protector Cleaning the foam motor and Hepa media filterCheck rotating floor brush and drive belt Replace drive belt Clearing clog Cleaning upper tankVacuum cleaner won’t turn TroubleshootingVacuum cleaner wont pick up dirt Visible dirt escaping from cleanerPart Name Replacement partsLimited One Year Warranty Warranty Bissell CleanView Multi Cyclonic VacuumBissell consumer services If your Bissell product should require service
Top Page Image Contents