Bissell 3760 warranty Power Height Adjustment, Special Tools, Use in tight narrow spaces

Page 7

Power Height Adjustment

The Powerfoot on your BISSELL Lift-Off Spinpower vacuum can be adjusted to clean several floor surfaces.

NOTE: For optimal cleaning performance, adjust to the lowest practical setting. If your cleaner is difficult to push, adjust to the next higher setting.

1.Place Handle in Upright Position.

2.Turn Height Adjustment Knob to desired setting.

Lowest Setting

–

For bare floors.

Medium Settings

– For short and medium

 

 

pile carpets.

Highest Setting

–

For plush pile carpet.

NOTE: You may also adjust the setting while in the Normal Cleaning Position.

Tip:

Before cleaning under low furniture, check area first for objects that might harm the unit or block the Vacuum Hose.

ATTENTION BERBER CARPET OWNERS:

Some Berber Carpets have a tendency to fuzz with wear. Repeated passes with your vacuum over the same area may aggravate this condition. Consider using the highest height setting or turning off the Rotating Brush for this type of carpet.

Special Tools

Your BISSELL Lift-Off Spinpower vacuum is not only a powerful floor vacuum cleaner, it’s also a versatile stairs and above floor vacuum when you select one of the special tools.

Note: The tools can be used with the vacuum in the Upright Position or with the Detachable Cylinder.

1.Detach the Vacuum Hose by grasping the Hose Grip and lifting to separate from the Hose Grip Base.

2.Attach tools by firmly pushing onto Vacuum Hose or Metal Telescoping Extension Wand.

Combination Dusting Brush/Upholstery Tool:

Two types of cleaning tools are included in one attachment; rotate for desired tool.

■Use Brush side to dust furniture, blinds, books, lamps, shelves, and baseboards.

■Use Upholstery side for curtains, draperies, cushions, and fabrics.

Crevice Tool:

Use in tight narrow spaces.

Metal Telescoping Extension Wand:

Use with desired attachment for a longer reach.

To extend the Wand, grasp the collar and push away from you. The collar will automatically lock into place. To retract, pull the collar toward you. The collar will automatically relock.

Stair Cleaning Tool (Select Models):

Use for stairs, area rugs, and other small carpeted areas. This tool can also be used for bare floors.

Note: The Stair Cleaning Tool does not store on board.

CAUTION:

Always place vacuum cleaner on floor in its fully Upright Position and make sure it is locked into place before removing Cylinder or when using tools. Placing the Lift-Off Spinpower in its full Upright Position automatically stops the rotating brush.

7

ug603-5570_3760E_1105.indd 7

2/2/06 4:12:13 PM

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Series E R ’ S G U I D EThanks For Buying a Bissell Lift-OffSpinpower Risk of fire, electric shock, or injury Important Safety InstructionsOperating procedures Attach Vacuum Hose and Tools How To Use This GuideHow To Put It Together Attach Handle To VacuumPower Switch/Brush Switch How To Use Your Lift-Off SpinpowerHandle Positions Special Tools Power Height AdjustmentUse in tight narrow spaces Release Button Clean Filter IndicatorBuckle Power Cord StorageTransporting Cleaner Shoulder StrapFull Line Lock Position How to Maintain Your Bissell Lift-Off SpinpowerCleaning The Upper Tank & Filter Empty Dirt ContainerUnplug the vacuum from electrical outlet Cleaning The Pre-Motor and Post-Motor FiltersPre-Motor Filter Hepa Media Post-Motor Filter Air MotorPassageway PulleyUnplug vacuum from electrical outlet Rotating Brush and Drive Belt MaintenanceTurboBrush Maintenance Reposition Brush Cover and screws. Tighten screws securelySuction Opening Air Passageway Turn the cleaner OFF O and unplug from electrical outletClearing Clogs Thermal ProtectorTroubleshooting Vacuum cleaner won’t runVacuum cleaner is difficult to push Visible dirt escaping from cleanerBissell Consumer Services If your Bissell product should require serviceReplacement Parts Bissell Lift-Off Spinpower Series Warranty Limited Two Year WarrantyMonday Thursday
Top Page Image Contents