Maintenance and care
Brush reset
If something becomes lodged in the foot and the brush shuts off, turn the cleaner off and unplug from the electrical outlet. Remove the obstruction. The brush will automatically reset when the cleaner is plugged in and turned back on.
CAUTION:
To reduce the risk of injury from moving parts, turn power switch OFF and disconnect power plug from electrical outlet.
Brush maintenance
The rotating brush should be checked regularly for accumulating debris that might reduce the cleaning performance of your vacuum.
1. | Unplug cleaner from electrical outlet. |
|
2. | Recline the handle and turn your cleaner | 3 |
| over so the bottom side is up. |
|
3.Carefully cut away any visible hair, fibers or debris from the brush roll.
Do not attempt to disassemble the vacuum foot or to remove the brush roll. If you feel it needs to be checked or replaced, have your cleaner serviced.
Belt maintenance
The brush belt is designed to last the useful life of the cleaner when used according to all instructions in this user's guide under normal household conditions. If you feel that it needs to be checked or replaced, have your cleaner serviced. Do not attempt to disassemble the
vacuum foot or to change the belt.
14 w w w . b i s s e l l . c o m