Maintenance and care
Changing the light bulb
1.Unplug cleaner from electrical outlet.
2.Recline handle for easier access to light bulb and remove screw to lift off lens.
3.Remove the bulb by grasping bulb and pulling straight out of the socket. Install the new bulb by pushing gently into the socket until the bulb snaps into place.
TurboBrush maintenance
The TurboBrush should be checked regularly for clogs or debris wrapping around the brush.
1.Remove tool from hose or front of vacuum.
2.Twist collar so opening is at the top and lift top cover to remove.
3.Remove the brush from the belt and clean debris.
4.Replace the brush inside the belt and place ends into slots on sides as shown.
5.Reposition top cover, making sure to line up inside tab at the front with the opening on the cover. Twist collar until opening is at the bottom to lock into place.
2
3
2
4
5
w w w . b i s s e l l . c o m
15