Bissell 80Q2 warranty Cleaning the Post-motor Hepa media filter, Thermal protector

Page 12

Maintenance and care

Cleaning the Post-motor HEPA media filter

The post-motor HEPA media filter assists in the filtration process to return clean air to the room. Use only BISSELL replacement filters in your CleanView Multi Cyclonic.

1.

Turn the power OFF. Unplug the vacuum

 

 

from the electrical outlet.

3.

2.

The post-motor filter is located behind

 

 

the door labeled “FILTER” on the rear of

 

 

the vacuum. Open the door by pushing

 

 

down on the tab of the door and pulling

 

 

out to remove.

 

3.

Remove the post-motor HEPA media

 

 

filter by grasping the handle on the filter

 

 

and pulling out to remove.

4.

4.

Replace the post-motor HEPA media

 

 

filter with a new filter.

 

 

NOTE: The post-motor filter is a

 

 

white, pleated HEPA media filter.

 

 

This filter is NOT washable and

 

 

must be replaced when it becomes

 

 

dirty.

 

5.

Replace the filter door by inserting the

 

 

two tabs at the bottom of the filter door.

 

 

Then push down on the tab on the

 

door and push it back into the vacuum. Release the tab on the door to lock into place.

Thermal protector

An internal thermal protector has been designed into your vacuum to protect it from overheating. When the thermal protector activates, the vacuum motor will stop operating. If this happens:

1.Turn the cleaner OFF (O) and unplug from electrical outlet.

2.Empty dirt container, check filters and air passages for dirt accumulation.

3.The thermal protector automatically resets after approximately 2 hours. If the thermal protector does not reset, call BISSELL Consumer Services or visit the website.

Post-Motor HEPA MediaFilter

12 w w w . b i s s e l l . c a

1 - 8 0 0 - 2 6 3 - 2 5 3 5

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Cleanview Mark J. Bissell Chairman, President & CEO Important Safety Instructions Reduce the risk of fire, electric shock, or injuryProduct view Assembly Power cord OperationsAutomatic cord rewind Power button Variable suction power controlAir flow regulator Special tools Maintenance and care Emptying the dirt containerCleaning the inner cyclone & screen Cleaning the pre-motor filter Cleaning the Post-motor Hepa media filter Thermal protectorTroubleshooting Vacuum cleaner won’t runBissell Consumer Services Bissell consumer servicesReplacement parts Part NameWarranty Bissell CleanView Multi Cyclonic Vacuum Limited One Year Warranty

80Q2 specifications

The Bissell 80Q2 is a robust and versatile carpet cleaner designed to tackle tough stains and maintain the cleanliness of your carpets and upholstery. This model combines powerful cleaning technology with user-friendly features, making it an essential tool for households and professionals alike.

One of the standout features of the Bissell 80Q2 is its Dual Tank System. This innovative design separates clean water from dirty water, ensuring that you are always using clean water and solution when cleaning. The clean tank holds a sufficient amount of water for extensive cleaning sessions, while the dirty tank is easy to detach and empty, minimizing mess and enhancing convenience.

The Bissell 80Q2 is equipped with a powerful motor that generates strong suction, allowing it to remove deep-set dirt and stains effectively. This makes it ideal for high-traffic areas and homes with pets. The machine’s rotating brushes also work diligently to agitate and lift dirt from carpet fibers, ensuring a thorough clean.

Another notable characteristic of the Bissell 80Q2 is its HeatWave Technology. This feature helps maintain consistent water temperature throughout the cleaning process, ensuring optimal cleaning results. It promotes better stain removal, especially for stubborn messes, and aids in faster drying times.

Portability and ease of use are key considerations in the design of the Bissell 80Q2. The machine comes with a lightweight design, making it easy to maneuver around the house. Additionally, the long power cord minimizes the need for constant outlet changes, allowing users to clean larger areas without interruption.

The Bissell 80Q2 also includes specialized attachments for cleaning upholstery and stairs. This enhances its versatility and allows users to tackle various surfaces with ease. The upholstery tool is particularly beneficial for spot cleaning furniture, while the stair tool is designed to navigate the unique contours of staircases.

In summary, the Bissell 80Q2 stands out as a reliable and efficient carpet cleaner. With its Dual Tank System, powerful suction capability, HeatWave Technology, and user-friendly design, it is tailored to meet the cleaning needs of modern households and commercial spaces. Whether it’s for everyday cleaning or tackling tough stains, the Bissell 80Q2 delivers performance and convenience that make it an excellent choice for maintaining a spotless home.
Top Page Image Contents