Assembly
1.Connect the hose to the vacuum by inserting the hose connector into the suction opening on the bottom front of the vacuum. Push in until it clicks into the locked position.
2.Connect the telescoping extension wand to the handle end of the hose.
3.Connect the floor nozzle foot onto the telescoping extension wand.
4.Attach the tool holder onto the top portion of the extension wand. Place the tools onto the tool holder for storage.
5.To extend the telescoping extension wand, push the black release button and then pull the bottom of the wand to the desired length.
6.Once assembled, you can store your vacuum by inserting the storage clip (located on the back of the floor nozzle) into the storage slot on the rear of the vacuum.
NOTE: Shorten the length of the telescoping extension wand for storage.
WARNING:
Plastic film can be dangerous. To avoid danger of suffocation, keep away from babies and children.
1.2.
3.4.
5
w w w . b i s s e l l . c a | 1 - 8 0 0 - 2 6 3 - 2 5 3 5 |