Bissell 88D6 Manual/hose cleaning, Grip of the flex hose, Control panel to start the SpotBot

Page 10

Operation

Manual/hose cleaning

1.Remove the hose from the unit by

 

depressing the release button.

1

2.

Remove the Tough Stain Brush from the

 

 

back of the unit by depressing the release

 

 

button. Attach the Tough Stain Brush onto

 

 

the grip of the flex hose.

 

3.

Select the manual/hose button on the

2a

 

control panel to start the SpotBot.

NOTE: In manual mode, the SpotBot will not turn on until the hose is removed from the unit. If it is not removed within 30 seconds of pushing the start button, the unit will shut off.

4.If your unit has a built in heater (not standard on all models) press the heater button to turn on the heat feature. Begin cleaning by holding the tool no more than six inches above the soiled surface. Depress the spray trigger for about five seconds to apply the cleaning solution to the soiled area then release the spray trigger. Be careful not to over wet.

5.Using the brush on the tool, gently scrub the soiled area for about 30 seconds or until the soiled area appears to be clean.

6.To suction up the dirt and cleaning solution, position the suction nozzle over the cleaned area, apply downward pressure on the tool, and pull nozzle toward you. You should see the dirty water pass through the nozzle. Continue until no more water can be removed. Normally, this step will require no more than one minute of back and forth passes.

NOTE: In manual mode, the SpotBot is equipped with a safety feature which will shut the unit off after 30 minutes. Press start to resume cleaning.

7.If the stain is still visible, repeat steps 4-6 as necessary.

8.When the cleaning is complete, lightly drag the suction nozzle across the stain for about two minutes to further aid in drying the cleaned area.

9.Press the manual/hose button to turn off the SpotBot.

2b

Tip:

One of the effective stain removing ingredients in Oxy GEN2 is Hydrogen Peroxide. Certain people may be affected by the formula when it comes into contact with their skin; it may turn the skin white and/or cause tingling. Washing your hands after use and applying hand lotion will remove any possible white discoloration.

Tip:

Check upholstery stuffing before cleaning. Colored stuffing may bleed through the fabric when it becomes wet.

10 w w w . b i s s e l l . c o m

Page 9 Page 11
Image 10
Page 9 Page 11
Contents E R ’ S G U I D E Thank you for buying a Bissell SpotBot Important Safety Instructions Front View Automatic Smart System Control PanelUnderside View Vacuum Suction Nozzles Hands Free Cleaning Brush Spray TipCord Wrap Power Cord Tough Stain Brush Storage Back ViewFront view Underside viewBack view To begin cleaningGetting ready Automatic Smart System Handsfree cleaning Pick up the unit and check the area that was cleanedControl panel to start the SpotBot Manual/hose cleaningGrip of the flex hose Press the manual/hose button to turn off the SpotBotHose cleaning StorageReduced or No Spray Cleaner will not runUnusual or Odd Noise No SuctionPlease do not return this product to the store Am 5 pm If your Bissell product should require serviceAm 4 pm Part Name Bissell Homecare Overseas Inc Limited One Year WarrantyFor Australian inquiries For New Zealand inquiries For all other inquiries

88D6 specifications

The Bissell 88D6, a powerful and versatile carpet cleaner, has garnered attention for its exceptional cleaning capabilities and user-friendly design. This machine is built to tackle tough stains and dirt embedded in carpets, upholstery, and stairs, making it an indispensable tool for households and businesses alike.

One of the standout features of the Bissell 88D6 is its robust suction power. Equipped with a strong motor, it effectively lifts dirt and pet hair from deep within fibers, ensuring a thorough clean. The dual spinning brushes further enhance its cleaning efficiency, disrupting dirt and debris while providing a deep clean.

Another significant aspect of the Bissell 88D6 is its lightweight and portable design. Weighing in at just under 13 pounds, it is easy to maneuver around furniture and up stairs, making it convenient for cleaning multiple areas of your home. The compact build also allows for easy storage in closets or small spaces, a practical consideration for those with limited storage options.

The Bissell 88D6 features a large capacity tank, which allows for extended cleaning sessions without the need for frequent refills. This means that users can clean multiple rooms or entire areas before needing to empty or refill the tank, saving time and effort. Moreover, it comes with a convenient rinse and a clean tank system, ensuring that dirty water is separated from the clean water for optimal cleaning performance.

This model also incorporates Bissell’s proprietary Spot & Stain formula, which is specially designed to tackle tough stains. It effectively breaks down and removes pet messes, wine spills, and other challenging spots, ensuring a clean and fresh environment. Additionally, the deep-reach cleaning tool included with the Bissell 88D6 allows users to clean upholstery, stairs, and other hard-to-reach places with ease.

The Bissell 88D6 also emphasizes user comfort and ease of operation. Featuring simple controls and an ergonomic handle, it is designed for a comfortable grip and smooth handling, minimizing user fatigue during extended cleaning sessions.

In conclusion, the Bissell 88D6 is an impressive carpet cleaner that combines power, portability, and ease of use, making it a top choice for effective cleaning. With its advanced technologies and thoughtful design, it proves to be a reliable ally in maintaining a clean and inviting home.
Top Page Image Contents