Bissell 1970, 1770 warranty Cleaning Fluid Section, Routine Maintenance, When Youre Done

Cleaning Fluid Section

Keep plenty of genuine BISSELL Fiber Cleansing Formula™ on hand so you can clean and protect whenever it fits your schedule. Always use genuine BISSELL deep cleaning formulas.

WARNING:

To Reduce the Risk of Fire and Electric Shock due to internal component damage, use only BISSELL cleaning fluids intended for use with the deep cleaner. Non- BISSELL cleaning solutions may harm the machine and void the warranty.

Routine Maintenance

When You're Done

1.Turn Power Switch OFF.

2.Unplug Power Cord from outlet.

3.Remove and empty Collection Tank.

a.Release Collection Tank latches [1 each side] by pulling up from bottom of latch and then out.

b.Carefully lift Collection Tank from Lower Body.

c.Carry Collection Tank to a toilet or sink. To empty, pour out contents using opening at back of Tank.

d.Rinse Collection Tank thoroughly.

e.Remove lint and hair from Red Gasket in base of unit. (Do not remove gasket)

4.Clean Nozzle Window by lifting latch and removing from machine. Rinse under running water. When finished replace Nozzle and secure with latch.

5.Replace Collection Tank on Lower Body and secure with latches.

6.Wrap Power Cord around Quick Release Cord Wrap™ on side of QUICKSTEAMER®.

7.Wipe all surfaces with a soft cloth. Store cleaner upright in a protected, dry area.

NOTE: You may have cleaning solution remaining in the Clean/Solution Tank. You may store your QuickSteamer this way for the next cleaning task, but never keep soiled solution in the Collection Tank.

WARNING:

To reduce the risk of injury from moving parts and/or electrical shock, turn Power Switch OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks.

lift by handle

a.b.

c.d.4

Dirty

CAUTION:

Do not store unit where freezing may occur. Damage to internal components may result.

8w w w . b i s s e l l . c o m

8 0 0 . 2 3 7 . 7 6 9 1