![](/images/new-backgrounds/1059894/5989411x1.webp)
How to Use Your BISSELL QuickSteamer
Before You Clean
1.Plan activities to give carpet time to dry.
2.Remove easily moved furniture (chairs, lamps, coffee/cocktail tables, etc.) from room if needed.
3.Vacuum carpet thoroughly.
4.Decide where to begin — and end — your job. Clean in 3’ X 4’ sections, starting in areas farthest from exit. Plan to leave a path open to empty soiled water and refill cleaner.
5.Carpeting will dry in three to four hours, depending on carpet style and air circulation in room. A floor fan speeds drying.
6.Replace furniture on damp carpeting by placing waxed paper under legs until floor dries completely.
Fill the Tank
1.Remove the Clean/Solution Tank by lifting it straight up, then away from the Lower Body.
WARNING:
To reduce the risk of fire, use only BISSELL Cleaning Formulas for Deep Cleaning Machines. Use of cleaning formulas that contain lemon or pine oil may damage this appliance and void warranty. Chemical spot cleaners or
2.Unscrew the black cap at the bottom of the Clean/Solution Tank.
3.Add one of the BISSELL Advanced Cleaning formu- las for Deep Cleaning machines to the formula fill line on the Clean/Solution tank. Fill the rest of the tank with hot (not boiling) tap water to the water fill line. Replace and tighten the black cap.
4.Place Clean/Solution Tank on Lower Body.
5.Rotate Quick Release Cord Wrap™ to release the Power Cord and plug into an outlet.
Pre-Treating
1.Using BISSELL Tough Stain
2.Wait 3
Tip:
Always vacuum thoroughly before you deep clean. If possible, move large furniture to an area you will not be cleaning.
2.
Tip:
Deep cleaning spots, spills and high traffic areas on a regular basis can prolong carpet life.
6w w w . b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
2/28/06 4:27:21 PM |